Tekmar Adhesives Tekmar Formula TS-1 Spot Cleaning Fluid, 1 gal TEK-TS-1-1G
Quick answer: Formula TS-1 is Tekmar's non-flammable, fast-drying spotter for industrial soils: grease, oil, marking pencil, chalk, lipstick and cosmetics, plus most screen printing inks and adhesives. It is run through a Target spot gun.
Sizes and options
1 gal 5 gal (2 x 2.5 gal) 55 gal drum
Specs
| Tekmar item # | TS1-4G |
|---|---|
| Size / option | 1 gal |
| Type | Non-flammable spot cleaning fluid (Tekmar) |
| Removes | Grease, oil, industrial stains, chalk and pencil marks, cosmetics incl. lipstick; most screen printing inks and adhesives |
| Fabrics | Tekmar: safe on virtually all fabrics, including silks and satins; test colorfastness first |
| Main ingredient (SDS) | Methylene chloride (dichloromethane) 72 to under 90% |
| Flash point (SDS) | Over 212 F (Tag closed cup) |
| Specific gravity / VOC (TDS) | 1.245 / 252 g/l |
| HMIS / NFPA (TDS) | H2 F1 R0 / H2 F1 R0 |
| Shipping (Tekmar) | 1 gal and smaller: Limited Quantity, ground. 2.5, 5 and 55 gal: Toxic liquid n.o.s., 6.1, UN2810, PG III |
| Maker sizes | 1 gal (4 x 1 gal case), 5 gal (2 x 2.5 gal), 55 gal drum |
How to use
- Fill the gun bottle about 4/5 full and squeeze the trigger until fluid sprays.
- Lay the garment on an exhaust station screen or a clean absorbent cloth.
- Test a hidden spot for colorfastness, then push the jet through the soil in small circles until it flushes out.
- Feather the wet edge with a wide spray, then dry with the exhauster or the gun's air dryer. Never put the shirt back in the dryer.
Safety and shipping
- Prop 65 (from the SDS): WARNING, contains methylene chloride, a chemical known to the State of California to cause cancer.
- Use only with ventilation; Tekmar strongly recommends a vacuum exhaust station. OSHA's methylene chloride standard sets a 25 ppm 8-hour limit and a 125 ppm 15-minute limit.
- Wear chemical goggles and gloves. Read the SDS before use.
- Shipping: ships from Tekmar's Santa Barbara, CA location; 1 gal and smaller Limited Quantity ground; 2.5/5/55 gal Class 6.1 UN2810 PG III hazmat ground.
Downloads
- Formula TS-1 technical data (PDF)
- Formula TS-1 safety data sheet (08-01-2019) (PDF)
- Formula TS-1 hoja de seguridad (PDF)
- New Gen cleaning fluids tech data (PDF)
- Cheat sheet: Tekmar spot fluids safety and shipping (PDF)
- Cheat sheet: Tekmar spot cleaning fluids and guns (existing) (PDF)
Video: Tekmar Spot Cleaning 101
FAQ
What does Formula TS-1 remove?
Tekmar lists grease, oil and other industrial stains, chalk and pencil marks, cosmetics including lipstick, and most screen printing inks and adhesives.
Is TS-1 flammable?
No. Tekmar's TDS calls it non-flammable and the SDS gives a flash point over 212 F.
Is TS-1 safe on silk?
Tekmar says it is safe on virtually all fabrics including silks and satins. Always test a hidden spot first.
Does TS-1 contain methylene chloride?
Yes. The SDS lists methylene chloride at 72 to under 90%, so OSHA exposure rules apply and good ventilation is needed.
How does TS-1 ship?
Per Tekmar, 1 gal and smaller ship ground as Limited Quantity; 2.5, 5 and 55 gal ship as UN2810 Class 6.1 hazmat.
Goes with
- Tekmar Formula TS-3 Premium Screen Print Ink Remover, 1 gal
- Tekmar Formula TS-5 Spot Cleaning Fluid, 1 gal
- Target TG300 PRO Spot Cleaning Gun 110V 60 Hz
- Target Exhaustex 2000 Spot Cleaning Station with Charcoal Filter 110V 60 Hz
- spot cleaning fluid chooser
Why Buckets of Ink
We carry Tekmar spot cleaning, pallet adhesive and press-side products for screen printers, with real answers from our Tempe, Arizona team. Questions on fluids, guns or parts: call 480-229-7806.
Tekmar Formula TS-1 Spot Cleaning Fluid, 1 gal
Price
Color
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
More Images
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.



