Tekmar Adhesives Target TG300 PRO Spot Cleaning Gun 110V 60 Hz TEK-TG300P
Quick answer: The Target TG300 PRO is Tekmar's heavy-duty airless spot cleaning gun with an adjustable TG1 nozzle, a fluid-saving pump and a 50 watt motor (Tekmar). Built for daily screen print ink spotting; pair it with an Exhaustex station.
Sizes and options
Specs
| Tekmar item # | TG300P |
|---|---|
| Size / option | 110V 60 Hz |
| Type | Electric airless spot cleaning gun |
| Motor | 50 watt (Tekmar product page) |
| Pump | Fluid-saving high-output pump (Tekmar) |
| Handle | Fiberglass-reinforced styrene; extra-wide container for stability |
| Nozzle | TG1 adjustable |
| Duty cycle | Intermittent: 15 s on / 15 s off |
| Voltage | 110V 60 Hz (TG300P) or 220V 50 Hz (TG300P-220) |
| Parts | 300P- series (2024-present). Older TG300 Series I-III use 300- parts |
| Option | Direct Feed hose (TGDIF) to skip refills |
| Warranty | Tekmar lifetime limited (RMA first) |
Parts for this gun
Tekmar part numbers for the TG300 PRO with prices.
How to use
- Fill the bottle about 4/5 full with an approved, non-flammable spot cleaning fluid; squeeze until it sprays.
- Lay the garment on an exhaust station screen; test colorfastness on a hidden spot.
- Push the jet through the soil in circles until it flushes out the back.
- Feather the wet edge with a wide spray and dry fast. Spray 15 seconds on, 15 seconds off.
- Empty the bottle before overnight storage.
Safety and shipping
- Never put a flammable liquid in any Tekmar spot gun. Formula TS-Special (acetone blend, flash point 7 F or lower) must NOT be used in a Tekmar TG gun. Water and water-based cleaners also void the gun warranty.
- High-pressure airless gun: never aim at skin or eyes (puncture wound risk). Wear goggles and gloves. Check the cord before every use.
- Plug only into an outlet that matches the gun's voltage.
- Shipping: UPS ground.
Downloads
- TG300 PRO instruction and parts manual (2024-present, 300P- parts) (PDF)
- Target spot guns flyer (PDF)
- TG1 nozzle instructions (PDF)
- Tekmar limited lifetime warranty (PDF)
- Cheat sheet: Tekmar spot gun parts by model (PDF)
- Cheat sheet: Tekmar spot gun troubleshooting and care (PDF)
- Cheat sheet: Tekmar spot fluids safety and shipping (PDF)
- Cheat sheet: Tekmar spot cleaning fluids and guns (existing) (PDF)
Video: Tekmar Spot Cleaning 101
FAQ
Which fluids can I use?
Approved, non-flammable spot cleaning solvents such as TS-5 or DT-1000. Never water or water-based cleaners; they void the warranty.
How long can I spray?
Tekmar says 15 seconds on, 15 seconds off. Longer runs can overheat the gun.
How do I reset the volume knob?
Tekmar's PRO sheet: turn the rear knob counter-clockwise to the stop, then clockwise 2 1/2 turns.
Are TG300 PRO parts the same as old TG300 parts?
No. The PRO uses 300P- part numbers; Series I-III guns use 300- parts. Use our parts finder.
Can I use TS-Special in this gun?
No. TS-Special is a flammable acetone blend, and Tekmar's gun manuals forbid flammable liquids.
Goes with
- Tekmar Formula TS-5 Spot Cleaning Fluid, 1 gal
- Tekmar Formula DT-1000 DTG and DTF Spot Remover, 1 gal
- Target TG1 Adjustable Nozzle
- Target Exhaustex 1500 Table Top Spot Cleaning Station 110V 60 Hz
- Target Direct Feed Attachment
- Tekmar spot gun parts finder
- Tekmar spot gun troubleshooting
Why Buckets of Ink
We carry Tekmar spot cleaning, pallet adhesive and press-side products for screen printers, with real answers from our Tempe, Arizona team. Questions on fluids, guns or parts: call 480-229-7806. Warranty repairs go through Tekmar: call 805-965-0704 or email service@tekmarltd.com for an RMA first.
Target TG300 PRO Spot Cleaning Gun 110V 60 Hz
Price
Color
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
More Images
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.



