Which White Plastisol Ink Should You Use?

Quick answer: on 100% cotton, run a cotton white such as WM Plastics Soft Cotton for the softest hand. On cotton/poly blends, fleece and polyester, you need a bleed-resistant white: Wilflex Rival Sport or Bolt LC, WM Plastics Titan, Ultimate or Brute, or QCM Perma. Answer five questions below to get your short list, with cure, flash and mesh from the maker's data.

The right white depends on the fabric, whether the shirt is dark, how low you need to cure, and whether you care more about soft hand or opacity. The chooser scores the whites we sell from WM Plastics, Wilflex (Avient) and QCM against your answers, using the makers' own ratings. It is a starting point: always test a print on the actual garment before running production, because the makers all say bleed and cure results vary by garment.

Which white plastisol ink do I need?

1. What are you printing on?
2. Shirt color
3. Do you need a low cure temperature?
4. What matters most?
5. How do you print?

Every white we sell, side by side

MakerWhite (product page)FabricsBleed resistanceOpacityMeshCure
WM PlasticsSoft Cotton WhiteCotton NoneHigh86–305270–325 °F (132–163 °C) for 1 to 1.5 min; heat press 390 °F (195 °C) for 8 sec
WM PlasticsBrite WhiteCotton Blends GoodHigh86–300260–325 °F (127–163 °C) for 1 to 1.5 min; heat press 390 °F (195 °C) for 8 sec
WM PlasticsUltimate WhiteCotton Blends PolyesterGreatHigh86–300260–325 °F (127–163 °C) for 1 to 1.5 min; heat press 390 °F (195 °C) for 8 sec
WM PlasticsTitan Poly WhiteBlends PolyesterExtremeExtreme86–180260–325 °F (127–163 °C) for 1 to 1.5 min; heat press 390 °F (195 °C) for 8 sec
WM PlasticsBrute White (low temp, low cure)Cotton Blends PolyesterExcellentHigh61–230LC series: 230 °F (121 °C) for 1.5–2.5 min, or 325 °F (163 °C) for 1–1.5 min. For 100% polyester WM suggests 250–270 °F for 1.5–2 min
Wilflex (Avient)Epic Athletic Poly White (K2200)Blends PolyesterBetterBetter86–160320 °F (160 °C)
Wilflex (Avient)Epic Rival Sport White (LC)Blends PolyesterBestBest86–160250–300 °F (121–148 °C)
Wilflex (Avient)Epic Bolt LC WhiteBlends PolyesterBestBest86–305270–320 °F (132–160 °C). On 100% polyester Wilflex says cure at 270 °F (132 °C) and pre-test for bleed
Wilflex (Avient)Epic Quick WhiteCotton Blends BetterBetter86–230300 °F (149 °C) in the Wilflex guide (our product page says around 320 °F, so follow the data sheet)
Wilflex (Avient)Amazing Bright Tiger WhiteBlends BetterBetter86–280300 °F (149 °C)
QCM (Avient)XOLB-142 Max Production WhiteCotton Blends ModerateExtremely opaque83–230320 °F (160 °C)
QCM (Avient)PERM-170 Perma WhitePolyesterExcellentVery good86–11060 seconds at 320 °F (160 °C); QCM says do not go over 320 °F

Sources: WM Plastics ink tech catalog (PDF) and the Wilflex Product Selection Guide (PDF), plus the QCM data sheets. Wilflex rates bleed resistance and opacity as Good, Better or Best; WM Plastics rates None, Good, Great, Excellent or Extreme; the two scales are not the same, so compare within a maker first. Cure and flash numbers are the maker's; confirm on the data sheet for your lot and your oven. QCM data sheets: XOLB142 and PERM170 (Avient PDFs).

How to choose a white plastisol

  1. Match the fabric. 100% cotton does not bleed dye, so a soft-hand cotton white works. Polyester and blends can bleed dye into the white, so they need a bleed-resistant white.
  2. Check the cure. Low-cure whites cure at lower temperatures, which helps on heat-sensitive fabrics and cuts energy use. Wilflex and WM Plastics both say to test the cured print on the actual garment.
  3. Pick opacity or soft hand. A thicker, more opaque white covers better; a softer white feels lighter.
  4. Mind the mesh. Stay inside the maker's mesh range. See our mesh count chart and cure temperature chart.
  5. Price the job. Use the plastisol ink cost per print calculator to compare two whites.

Frequently asked questions

What is the best white plastisol ink for dark shirts?

On 100% cotton, a cotton white such as WM Plastics Soft Cotton or Wilflex Epic Quick White gives good opacity. On polyester and blends, pick a bleed-resistant white such as Wilflex Rival Sport or Bolt LC, WM Plastics Titan, or QCM Perma. Use the chooser above.

What white plastisol stops dye bleed on polyester?

Look for the makers' bleed-resistance ratings: Wilflex rates Rival Sport LC White and Bolt LC White Best, and WM Plastics rates Titan Poly White Extreme. QCM Perma White is made for 100% polyester. Always test the cured print, because dye migration depends on the garment.

What is a low-cure white plastisol?

It is a white that cures at a lower temperature than standard plastisol. Wilflex Rival Sport and Bolt LC and WM Plastics Brute White are low-cure whites. Lower cure helps heat-sensitive fabrics and cuts energy use, but you must test that the print is fully cured.

What mesh count should I use for white plastisol?

Stay inside the maker's range. For example, WM Plastics lists 86-300 for Ultimate White, Wilflex lists 86-160 for Athletic Poly White, and WM Plastics suggests 110 mesh or coarser for Brute White as an underlay on 100% polyester. See our mesh count chart.

Which white has the softest hand?

WM Plastics calls Soft Cotton White its premium white with an extreme soft hand, and Wilflex rates Epic Quick White Best for hand. Softer whites trade some bleed resistance, so use them on cotton.

Which white is best for an automatic press?

QCM XOLB-142 Max Production White is made for high-volume automatic printing, with almost zero dwell flash time. Wilflex Epic Quick White also flashes extremely fast. Ask us for the data sheets.

Where do I find the safety data sheets?

Each recommendation links to the maker's own data sheets where we have them: the WM Plastics safety data sheet and ink catalog, and the Wilflex Product Selection Guide. For QCM, the Avient data sheets for XOLB142 and PERM170 are linked on each result.

Talk to a real screen printer: 480-229-7806
Buckets of Ink, 906 S Priest Dr, Suite 101, Tempe, AZ 85281. Same-day pickup, Phoenix-metro delivery and fast shipping.
Ask a questionAsk about our discountsCall 480-229-7806
Search
Your cart is empty
Search