Buckets of InkFree Tool · Spot Cleaning Fluid Chooser
Home › Tekmar › Spot Cleaning Fluid Chooser
Quick answer: match the fluid to the stain. Cured plastisol and most inks: Formula TS-5 in a spot gun. DTG ink or DTF residue: Formula DT-1000. Grease, oil and cosmetics: Premium 2000. Vinyl letters: TS-V. Light cotton scorch: Scorch Remover. Never put a flammable cleaner such as TS-Special in a Tekmar spot gun.
Spot fluids compared
| Fluid | In a spot gun? | Flammable? | Shipping | Notes (Tekmar / SDS) |
|---|
| Formula TS-5 | Yes | No (no flash point) | Not regulated | New Gen: no methylene chloride or n-propyl bromide; all fabrics. |
| Formula DT-1000 | Yes | No (no flash point) | Not regulated | Made for DTG ink and DTF transfer residue. |
| Premium 2000 | Yes, or by hand | No | Not regulated | Grease, oil, dirt, cosmetics; bedding and upholstery too. |
| Formula TS-3 | Yes | No (over 212 F) | 1 gal Limited Quantity; larger UN2810 hazmat | Contains methylene chloride (Prop 65 cancer warning). |
| Formula TS-1 | Yes | No (over 212 F) | 1 gal Limited Quantity; larger UN2810 hazmat | Contains methylene chloride; safe on silks per Tekmar. |
| TS-V Vinyl Letter Remover | No (applicator bottle) | No (over 212 F) | Limited Quantity | Apply from the back, peel from the front. |
| Formula TS-Special | NO - never in a Tekmar gun | YES: flash point 7 F or lower | UN1993 Class 3, ground only | Acetone blend. Do not use in TG guns or Exhaustex stations. |
| Texstyle Scorch Remover | No (pump spray) | No | Ground only (oxidizer) | Cotton only; light surface scorch. |
| TB-AR Orange | No (spray) | No | Not regulated | Removes dried Tekmar pallet adhesive; cleans TB gun nozzles. |
TS-1, TS-3 and TS-V contain methylene chloride: OSHA sets workplace limits of 25 ppm (8-hour) and 125 ppm (15-minute), so spot over an exhaust station and read the SDS.
Three rules for clean spotting
- Test a hidden spot for colorfastness first.
- Spot plastisol only after it is fully cured.
- Dry fast with an exhaust station or air dryer; never back through the dryer.
Related
FAQ
What is the best spot cleaning fluid for plastisol?
For cured plastisol, Tekmar's TS-5 (no methylene chloride) or TS-3 are the gun fluids. Let the ink cure fully first or it smears.
What removes DTG ink or DTF transfers?
Tekmar's Formula DT-1000 is made for DTG ink and DTF transfer residue and is sprayed through a spot gun.
Can I put a flammable cleaner in my spot gun?
No. Every Tekmar TG gun manual bans flammable liquids, so Formula TS-Special must not go in a Tekmar gun.
Which spot fluids ship without hazmat fees?
Per the SDS, TS-5, DT-1000 and Premium 2000 are not regulated for transport. TS-Special ships ground as a Class 3 flammable.
How do I avoid rings after spot cleaning?
Feather the wet edge with a wide spray and dry fast with an exhaust station or air dryer. Never put the shirt back in the dryer.