Tekmar Adhesives Tekmar Formula TS-3 Premium Screen Print Ink Remover, 55 gal drum TEK-TS-3-55G

    Quick answer: Formula TS-3 is Tekmar's plastisol spot remover: the maker says it takes out virtually all cured plastisol, most water-based, catalyst, nylon and puff inks, and most transfer adhesives. Non-flammable and made to be sprayed through a Target spot gun.

    Sizes and options

    1 gal 5 gal (2 x 2.5 gal) 55 gal drum

    Specs

    Tekmar item #TS3-55G
    Size / option55 gal drum
    TypeNon-flammable, fast-drying ink spot remover (Tekmar)
    RemovesCured plastisol (virtually 100% per Tekmar); most water-based, catalyst, nylon and puff inks; most transfer and heat-transfer adhesives; grease and oil
    Main ingredient (SDS)Methylene chloride 70 to under 90%
    Flash point (SDS)Over 212 F (Tag closed cup)
    Specific gravity / VOC (TDS)1.257 / 240 g/l
    HMIS / NFPA (TDS)H2 F1 R0 / H2 F1 R0
    Shipping (Tekmar)1 gal and smaller: Limited Quantity, ground. 2.5, 5 and 55 gal: UN2810, 6.1, PG III
    Maker sizes1 gal (4 x 1 gal case), 5 gal (2 x 2.5 gal), 55 gal drum

    How to use

    1. Make sure plastisol is fully cured before spotting it, or it will smear.
    2. Fill the gun 4/5 full and prime it.
    3. Over an exhaust station, hold the gun about 6 in away and circle the spot from the outside in until it flushes through.
    4. Feather the edge with a wide spray and dry fast with the exhauster or air dryer.

    Safety and shipping

    • Prop 65 (from the SDS): WARNING, contains methylene chloride, known to the State of California to cause cancer.
    • OSHA methylene chloride standard: workplace limits of 25 ppm (8-hour average) and 125 ppm (15-minute); use an exhaust station or good ventilation.
    • Wear goggles and gloves. Read the SDS.
    • Shipping: ships from Tekmar's Santa Barbara, CA location; 1 gal and smaller Limited Quantity ground; 2.5/5/55 gal Class 6.1 UN2810 PG III hazmat ground.

    Downloads

    Video: Tekmar Spot Cleaning 101

    Tekmar Spot Cleaning 101 video (Tekmar) – Buckets of Ink

    FAQ

    Will TS-3 remove cured plastisol?

    Yes. Tekmar says TS-3 removes virtually 100% of cured plastisol, plus most water-based, catalyst, nylon and puff inks.

    Should the ink be cured before I spot it?

    For plastisol, yes: Tekmar says spot only fully cured ink, or it runs and spreads.

    Is TS-3 flammable?

    No. The SDS gives a flash point over 212 F and Tekmar calls it non-flammable.

    Does TS-3 contain methylene chloride?

    Yes, 70 to under 90% per the SDS, so it carries a Prop 65 cancer warning and OSHA exposure rules apply.

    TS-3 or TS-5?

    TS-3 is Tekmar's methylene chloride plastisol remover; TS-5 is the New Gen option with no methylene chloride or n-propyl bromide.

    Goes with

    Why Buckets of Ink

    We carry Tekmar spot cleaning, pallet adhesive and press-side products for screen printers, with real answers from our Tempe, Arizona team. Questions on fluids, guns or parts: call 480-229-7806.

    Tekmar Formula TS-3 Premium Screen Print Ink Remover, 55 gal drum

    Price

    Color

    Quantity

    Add to Cart

    More Images

    Shipping

    bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.

    Search
    Your cart is empty
    Search
     

    Select Size

     

    Extra Product Options

       
       
       
       
       
       
       
       
       
       

      Please enter your Layout name

       
       
       

      Select Type Of TextSelect Type Of Team nameSelect Type Of DesignSelect placeholder type

      Colors are not as solid, good when ordering low qty
      Colors are not as solid, good when ordering low qty
      Colors are not as solid, good when ordering low qty
      Colors are not as solid, good when ordering low qty
       

      Please enter your text

       

      Select a design

      Please wait while the image gallery loads

       
       
       

      Confirm Request Quote

      You will be redirected to a page where you can request a quote for this blank product. Any decorations you have added to this product will be removed.

       

      Select Product

      Select Product

        Products

         

        How many colors are in this design?

        You now have multiple elements making up this screenprint design

        Select the colors that appear in your design.

        You need to specify the total number of unique colors used across all the elements in your design.

        This helps us determine the pricing based on the number of colors in your design.

        • (plus white base)

        You can also specify the colors used in your design eg "Red", "Blue", "pantone 1809".

        If you dont tell us, our professional designer will work it out for you.

        • (plus white base)

        Currently selected Colors

         

        How many colors are in this design?

        • colored image
        • original image

        How many colors in your design?

        4 Colors

        Select the colors to be used

          COLOR PICKERS GO HERE
         

        Your Cart

        Products Qty Price
         

        Re-use existing screen print designs

        You have already used screen printing in this order. To avoid additional screen costs you can re-use an existing screen print design for this product.

        You can

        Re-use existing designs

        or

         

        WarningError

        Your layout contains images that have been resized to the point where they may appear blurred.

        Below-quality images listed

        Your layout contains images that appear outside the design area.

        You cannot save the product until you have moved the images within the design area.

        Your layout contains images that appear outside the design area.

        Your layout contains overlapping images.

        You cannot save the product until you have moved the images so they are not overlapping.

        Blank product purchase is not allowed

        You will not be able to purchase this product until you add a decoration design.

        Inactive blank product in use

        Product minimum quantity requirements not met

        You will need to increase the specified quantity to add this item to your cart.

        Process minimum quantity requirements not met

        Screen(s) still updating...

        You will not be able to purchase this item until all re-used screens have been updated.

        Your layout contains images that have been resized to meet the 25 megapixel limit for raster images and they may appear smaller than intended. You can avoid the raster size limit by uploading artwork in vector format when possible.

        By clicking OK, you are agreeing to accept the final product regardless of image quality. Click Cancel if you want to go back and fix the images.

         

        Add Team name

         

        Edit Team name.

        Add Another Team name
         

        Uploading file