Ulano Emulsion Ulano QX-5 Blue Photopolymer Emulsion – 1 Gal 1GUFQX-5BLUE
Quick answer: QX-5 Blue is a ready-to-use, ultra-fast-exposing SBQ photopolymer emulsion in blue for plastisol and general textile screen printing.
Sizes
Specs
| Ulano part # | 30101-1GL |
|---|---|
| Our part # | 1GUFQX-5BLUE |
| Size | 1 Gal |
| Type | SBQ photopolymer, presensitized (non-diazo dual cure) |
| Best for | Plastisol inks, most washup solvents and some water-based inks |
| Solids | 41% |
| Viscosity | 5,000 cps |
| Color | Blue (high contrast for stencil inspection, even on dyed mesh) |
| Exposure | Ultra-fast; suits busy shops and weaker light sources |
| Shelf life | Unopened: 1 year at 70 F (21 C) |
| Reclaim | Ink wash, degreaser No. 3, then Stencil Remover Liquid No. 4 or Paste No. 5; Haze Remover Paste No. 78 for ghosting |
| Container sizes and part numbers | 28 oz (30101-28O); 1 Gal (30101-1GL); 5 Gal (30101-5GL); 50 Gal Drum (30101-50G) |
How to use
- Degrease the mesh with Magic Mesh Prep or Screen Degreaser No. 3 (new untreated synthetic mesh can first be abraded, or abraded and degreased together with Ulanogel 23), rinse well and let it dry completely.
- No sensitizer to add: this emulsion is presensitized. Work under yellow safe light from here until the stencil is exposed. Coat the screen: one coat on each side for a quick job, or two coats on the printing side and two on the squeegee side wet-on-wet (turn the screen 180 degrees after each coat) for a thicker, smoother stencil.
- Dry the screen flat with the printing side down in a clean, dust-free spot; a fan helps, warm filtered air up to 104 F (40 C) is fine, and a dehumidifier helps in humid rooms.
- Work out the starting exposure from the base table on the TDS for your light source, multiply by the variable factors, then confirm the real time with a step wedge test or the Ulano ExpoCheck.
- Wash out with a gentle cold spray on both sides, then a firmer spray from the printing side until the image clears; rinse until no soft emulsion remains on the squeegee side, blot with newsprint and dry.
- To reclaim, remove the ink with All-Purpose Ink Wash or the mildest solvent that works, degrease with No. 3, brush on Stencil Remover Liquid No. 4 or Paste No. 5 for about five minutes (never let it dry), power wash, and use Haze Remover Paste No. 78 only if a ghost remains.
Tips
- The high solids bridge coarse mesh well and dry quickly, so it is a good all-round plastisol choice.
- Stencils stay non-tacky in humid shops, but still dry the screen fully and dehumidify if you can.
Safety and shipping
- Handle the emulsion and coated screens under yellow safe light only until exposure.
- Store unopened containers in a cool, dry place and keep the lid tight; close the container after each use.
- Shipping: Ships ground.
Downloads
- Ulano QX-5 Blue Photopolymer Emulsion technical data sheet (TDS) (PDF)
- Ulano QX-5 Blue Photopolymer Emulsion product fact sheet (PDF)
- Cheat sheet: Ulano emulsion by ink type (PDF)
FAQ
Does QX-5 Blue need diazo?
No. It is fully presensitized, so you coat straight from the container under yellow safe light.
What is the shelf life of QX-5 Blue?
Unopened it keeps 1 year at 70 F (21 C).
What inks does QX-5 Blue resist?
It resists plastisol inks, most washup solvents and some water-based inks.
What viscosity and solids is QX-5 Blue?
5,000 cps viscosity and 41% solids.
Is QX-5 Blue easy to reclaim?
Yes. Ulano designed it to reclaim by hand or in automatic stencil removal equipment.
Goes with
- Ulano QT-Thix Photopolymer Emulsion
- Ulano QX-5 Red Photopolymer Emulsion
- Ulano QX-6 Photopolymer Emulsion
- Ulano QX-7 Photopolymer Emulsion
- Ulano Orange Photopolymer Emulsion
- Ulano Trifecta Photopolymer Emulsion
- Ulano Platinum Photopolymer Emulsion
- Ulano QXO Photopolymer Emulsion
- All Ulano emulsions, films and screen chemicals
Why Buckets of Ink
We carry the Ulano line, from diazo, SBQ and dual-cure emulsions to capillary films, inkjet film and screen chemicals, with real answers from our Tempe, Arizona team. Call or text 480-229-7806.
Ulano QX-5 Blue Photopolymer Emulsion – 1 Gal
Price
Color
Size
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.


