Ulano Emulsion Ulano QXO Photopolymer Emulsion – 28 oz 28UFQXO
Quick answer: QXO is a ready-to-use, fast-exposing SBQ photopolymer emulsion with anti-halation color, formerly sold as DP-578 Orange, for plastisol sportswear printing.
Sizes
Specs
| Ulano part # | 30327-28O |
|---|---|
| Our part # | 28UFQXO |
| Size | 28 oz |
| Type | SBQ photopolymer, presensitized and premixed |
| Best for | Plastisol (including post-phthalate) and most washup solvents |
| Solids | 44-46% |
| Viscosity | 6,000-8,000 cps |
| Color | Orange (anti-halation) |
| Exposure | Ultra-fast; works well with LED and fluorescent units |
| Former name | DP-578 Orange |
| Reclaim | Ink wash, degreaser No. 3, then Stencil Remover Liquid No. 4 or Paste No. 5; Haze Remover Paste No. 78 for ghosting |
| Container sizes and part numbers | 28 oz (30327-28O); 1 Gal (30327-1GL); 5 Gal (30327-5GL); 50 Gal Drum (30327-50G) |
How to use
- Degrease the mesh with Magic Mesh Prep or Screen Degreaser No. 3 (new untreated synthetic mesh can first be abraded, or abraded and degreased together with Ulanogel 23), rinse well and let it dry completely.
- No sensitizer to add: this emulsion is presensitized. Work under yellow safe light from here until the stencil is exposed. Coat the screen: one coat on each side for a quick job, or two coats on the printing side and two on the squeegee side wet-on-wet (turn the screen 180 degrees after each coat) for a thicker, smoother stencil.
- Dry the screen flat with the printing side down in a clean, dust-free spot; a fan helps, warm filtered air up to 104 F (40 C) is fine, and a dehumidifier helps in humid rooms.
- Work out the starting exposure from the base table on the TDS for your light source, multiply by the variable factors, then confirm the real time with a step wedge test or the Ulano ExpoCheck.
- Wash out with a gentle cold spray on both sides, then a firmer spray from the printing side until the image clears; rinse until no soft emulsion remains on the squeegee side, blot with newsprint and dry.
- To reclaim, remove the ink with All-Purpose Ink Wash or the mildest solvent that works, degrease with No. 3, brush on Stencil Remover Liquid No. 4 or Paste No. 5 for about five minutes (never let it dry), power wash, and use Haze Remover Paste No. 78 only if a ghost remains.
Tips
- Anti-halation color means you can use white mesh without fine lines closing up.
- Works with automatic washout and reclaiming equipment.
Safety and shipping
- Handle the emulsion and coated screens under yellow safe light only until exposure.
- Store unopened containers in a cool, dry place and keep the lid tight; close the container after each use.
- Shipping: Ships ground.
Downloads
- Ulano QXO Photopolymer Emulsion technical data sheet (TDS) (PDF)
- Cheat sheet: Ulano emulsion by ink type (PDF)
FAQ
What was QXO called before?
Ulano sold it as DP-578 Orange.
Does QXO need diazo?
No. It is presensitized and premixed.
Is QXO good for LED exposure?
Yes. Ulano says it is especially efficient with fixed or scanning LED units and low-intensity lights.
What are the solids and viscosity of QXO?
44-46% solids and 6,000-8,000 cps.
Goes with
- Ulano QT-Thix Photopolymer Emulsion
- Ulano QX-5 Red Photopolymer Emulsion
- Ulano QX-5 Blue Photopolymer Emulsion
- Ulano QX-6 Photopolymer Emulsion
- Ulano QX-7 Photopolymer Emulsion
- Ulano Orange Photopolymer Emulsion
- Ulano Trifecta Photopolymer Emulsion
- Ulano Platinum Photopolymer Emulsion
- All Ulano emulsions, films and screen chemicals
Why Buckets of Ink
We carry the Ulano line, from diazo, SBQ and dual-cure emulsions to capillary films, inkjet film and screen chemicals, with real answers from our Tempe, Arizona team. Call or text 480-229-7806.
Ulano QXO Photopolymer Emulsion – 28 oz
Price
Color
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
More Images
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.


