Home › Ask Buckets › Kor-Chem ER-190 Dilution Ratio, Dwell Time & Yield
BI
Buckets of InkSpecs from published maker data · Tempe, AZ
Short answerDilute Kor-Chem ER-190 1:45 to 1:90 (chemical : water). At 1:90 one 8 oz bottle makes about 5.7 gallons of ready-to-use emulsion remover; spray on, wait 30 seconds to 3 minutes, then rinse.
ER-190 ratio and yield table
| Ratio | Oz per gallon | 8 oz makes |
|---|
| 1:45 | 2.8 oz | 2.9 gal |
| 1:60 | 2.1 oz | 3.8 gal |
| 1:75 | 1.7 oz | 4.8 gal |
| 1:90 | 1.4 oz | 5.7 gal |
Steps
1. Remove ink first. 2. Dilute in a plastic container; do not mix with other chemicals. 3. Spray the print side (both sides for hard emulsions). 4. Dwell 30 seconds to 3 minutes. 5. Rinse medium to high pressure, final rinse, dry before recoating.
Safety
Corrosive oxidizer: goggles, face shield, chemical-resistant gloves; keep away from combustibles. 0% VOC and not flammable per the TDS.
Frequently asked questions
Does ER-190 degrease?
Yes, it has a built-in degreaser (Kor-Chem TDS).
Is ER-190 flammable?
No, 0% VOC and no flash point.
Related: Kor-Chem · Emulsion remover · How to reclaim screens
Have a question for our shop? Call or text
480-229-7806 (Monday to Friday, 7:30 AM to 4:00 PM Arizona time) or
send us a message. Want to see a machine run? Visit our demo room in Tempe, AZ during the same hours. In-stock orders placed by 2:30 PM Arizona time ship the same day from Tempe, AZ. Need equipment?
Get a quote.
We Bring the Store to Your Door. ← More straight answers from our Tempe shop