How Do You Reclaim a Screen? Ink Remover, Dip Tank and Power Wash

Home › Ask Buckets › How to reclaim a screen

CB
Chris BreazealeOwner, Buckets of Ink · Tempe, AZ
Short answer

Clean the ink out with an ink remover like Easiway 842, remove the tape, scrub both sides with Strip-e-doo or Easiway 701N, let it sit a few minutes without drying, then power wash. A dip tank works too, but only for a minute. Finish with D-Haze, and replace the mesh if the screen has lost tension.

Ink remover first, then emulsion remover

When reclaiming a screen, the best way is to first use an ink remover like Easiway 842 to properly clean the ink out of the screen, and remove the tape. Once that is done, you can use Franmar Strip-e-doo or Easiway 701N. Take a scrub pad and scrub both sides, with a spray bottle mist right on the screen: a light scrub on both sides. Let it sit for a few minutes (don't let it dry), then take your power washer and wash it off.

The dip tank: one minute, no longer

The other option, once the ink is removed or not, is to put the screen in a dip tank. The goal in the dip tank is a minute and no longer, because the longer it sits, the more it breaks down all the emulsion and chemicals that are on that screen. Those fall to the bottom of the dip tank, and the dip tank chemicals keep trying to fight and destroy those products in there. So dip it, let it sit for a minute, enough to soften up the emulsion so you can power wash.

Finishing with D-Haze

One final product that works fantastic when you're done power washing and getting the screen clean is Franmar D-Haze. Use a light mist on both sides, scrub both sides with a different scrubby pad, do two or three of those screens, then power wash them, and they will look like brand-new screen mesh.

How long mesh lasts and when to replace it

As long as the mesh doesn't have any holes in it, it should last for years. The downfall is that sometimes you don't realize how much tension you've lost on that screen, and that can become a bigger issue when it goes to printing and registration. My recommendation is to evaluate every screen after you're done reclaiming it, see where it is, and if it's loose tension-wise, it might be a good idea to switch it out and replace the mesh.

Products mentioned

Frequently asked questions

How long should a screen sit in a dip tank?

About a minute and no longer. The longer it sits, the more it breaks down the emulsion and chemicals on the screen, which fall to the bottom of the tank. Dip it long enough to soften the emulsion, then power wash.

How long does screen mesh last?

As long as it does not have any holes in it, it should last for years. The downfall is not realizing how much tension you have lost, which can become a bigger issue at printing and registration.

When should I replace the mesh?

Evaluate every screen after you reclaim it. If it is loose tension-wise, it may be a good idea to switch it out and replace the mesh.

Related: Haze removers · Dip tank solution · Easiway 701N vs EasiStrip SUPRA · Screen tension

Have a question for our shop? Call or text 480-229-7806 (Monday to Friday, 7:30 AM to 4:00 PM Arizona time) or send us a message. Want to see a machine run? Visit our demo room in Tempe, AZ during the same hours. In-stock orders placed by 2:30 PM Arizona time ship the same day from Tempe, AZ. Need equipment? Get a quote.We Bring the Store to Your Door.

← More straight answers from our Tempe shop

Search
Your cart is empty
Search