Ulano Emulsion Ulano Trifecta Photopolymer Emulsion – 1 Gal 1GUFTRIFECTA
Quick answer: Trifecta is a violet, presensitized SBQ dual-cure emulsion for plastisol, water-based and discharge inks that needs no sensitizer or hardener.
Sizes
Specs
| Ulano part # | 30344-1GL |
|---|---|
| Our part # | 1GUFTRIFECTA |
| Size | 1 Gal |
| Type | SBQ dual-cure, presensitized |
| Best for | Plastisol (incl. post-phthalate), water-based and discharge inks |
| Viscosity | 6,500 cps at 25 C |
| Color | Violet |
| Exposure | Works with conventional units and LED or scanning CTS; yellow mesh gives best resolution and latitude |
| Shelf life | 12 months stored above 40 F and below 70 F; coated screens about 4 weeks |
| Post-exposure | For water-based or discharge ink, post-expose the dry stencil about three times the optimal exposure |
| Reclaim | Ink wash, degreaser No. 3, then Stencil Remover Liquid No. 4 or Paste No. 5; Haze Remover Paste No. 78 for ghosting |
| Container sizes and part numbers | 28 oz (30344-28O); 1 Gal (30344-1GL); 5 Gal (30344-5GL) |
How to use
- Degrease the mesh with Magic Mesh Prep or Screen Degreaser No. 3 (new untreated synthetic mesh can first be abraded, or abraded and degreased together with Ulanogel 23), rinse well and let it dry completely.
- No sensitizer to add: this emulsion is presensitized. Work under yellow safe light from here until the stencil is exposed. Coat the screen: one coat on each side for a quick job, or two coats on the printing side and two on the squeegee side wet-on-wet (turn the screen 180 degrees after each coat) for a thicker, smoother stencil.
- Dry the screen flat with the printing side down in a clean, dust-free spot; a fan helps, warm filtered air up to 104 F (40 C) is fine, and a dehumidifier helps in humid rooms.
- Work out the starting exposure from the base table on the TDS for your light source, multiply by the variable factors, then confirm the real time with a step wedge test or the Ulano ExpoCheck.
- Wash out with a gentle cold spray on both sides, then a firmer spray from the printing side until the image clears; rinse until no soft emulsion remains on the squeegee side, blot with newsprint and dry.
- To reclaim, remove the ink with All-Purpose Ink Wash or the mildest solvent that works, degrease with No. 3, brush on Stencil Remover Liquid No. 4 or Paste No. 5 for about five minutes (never let it dry), power wash, and use Haze Remover Paste No. 78 only if a ghost remains.
Tips
- Method 1 coating (two printing side, one squeegee side) covers most jobs.
- Dehumidify the drying area above about 40 percent RH.
Safety and shipping
- Handle the emulsion and coated screens under yellow safe light only until exposure.
- Store unopened containers in a cool, dry place and keep the lid tight; close the container after each use.
- Coated screens keep about 4 weeks at 68-77 F in total darkness.
- Shipping: Ships ground.
Downloads
- Ulano Trifecta Photopolymer Emulsion technical data sheet (TDS) (PDF)
- Ulano Trifecta Photopolymer Emulsion product fact sheet (PDF)
- Cheat sheet: Ulano emulsion by ink type (PDF)
FAQ
Does Trifecta need sensitizer or hardener?
No. It is premixed and presensitized; optional diazo is sold separately for very long runs with aggressive inks.
Can Trifecta run discharge inks?
Yes, when properly exposed and post-exposed.
How do I post-expose Trifecta?
After washout and drying, expose the squeegee side for about three times the optimal exposure.
How long does Trifecta last?
12 months unopened at 40-70 F; coated screens about 4 weeks in the dark.
Goes with
- Ulano QT-Thix Photopolymer Emulsion
- Ulano QX-5 Red Photopolymer Emulsion
- Ulano QX-5 Blue Photopolymer Emulsion
- Ulano QX-6 Photopolymer Emulsion
- Ulano QX-7 Photopolymer Emulsion
- Ulano Orange Photopolymer Emulsion
- Ulano Platinum Photopolymer Emulsion
- Ulano QXO Photopolymer Emulsion
- All Ulano emulsions, films and screen chemicals
Why Buckets of Ink
We carry the Ulano line, from diazo, SBQ and dual-cure emulsions to capillary films, inkjet film and screen chemicals, with real answers from our Tempe, Arizona team. Call or text 480-229-7806.
Ulano Trifecta Photopolymer Emulsion – 1 Gal
Price
Color
Size
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.


