CCI CCI ChemCon 100 Low Viscosity Instant Adhesive – 1 lb CCI-CHEMCON100-1LB
Quick answer: ChemCon 100 is a one-part, low viscosity cyanoacrylate instant adhesive for bonding mesh to wood or aluminum frames.
Specs
| Our part # | CCI-CHEMCON100-1LB |
|---|---|
| Size | 1 lb |
| Type | One-part instant (cyanoacrylate) adhesive |
| Viscosity | Low |
| Use | Bonding fabric (mesh) to wood or aluminum frames and most other substrates |
| Mixing | None; no catalyst needed |
| Cure | Bond starts on contact; an instant adhesive hardener cures it instantly |
| Surfaces | Must be clean and dry |
| Form | Fluid |
| Container sizes | 1 lb container |
How to use
- Make sure the surfaces to be bonded are clean and dry.
- Apply an even layer of adhesive with the applicator tip provided.
- Spread it evenly with a scraper.
- For an instant cure, apply ChemCon Adhesive Hardener (aerosol or liquid) directly over the adhesive.
Tips
- Low viscosity lets the adhesive penetrate between bond lines and cure fast.
- The bond starts on contact, which speeds up re-stretching.
- Do not over-apply hardener; too much can weaken the bond.
Safety and shipping
- Causes skin irritation and serious eye irritation; may cause respiratory irritation (signal word Warning).
- Use only outdoors or in a well-ventilated area; avoid breathing vapors.
- Wear eye protection and protective gloves; wash skin with plenty of water if contacted.
- Keep container tightly closed and stored locked up.
- Shipping: Ships from Tempe, AZ.
Downloads
- CCI ChemCon 100 Low Viscosity Instant Adhesive technical data sheet (PDF)
- CCI ChemCon 100 Low Viscosity Instant Adhesive safety data sheet (SDS) (PDF)
FAQ
What is ChemCon 100?
A low viscosity, one-part instant adhesive for bonding screen mesh to frames.
Do I need to mix a catalyst?
No. It is a one-part system with no catalyst.
How do I make it cure instantly?
Apply ChemCon Adhesive Hardener directly over the adhesive.
What is the difference between ChemCon 100 and 300?
ChemCon 100 is low viscosity; ChemCon 300 is medium viscosity. Hi-Flow is very low.
Do surfaces need preparation?
Yes. Surfaces must be clean and dry.
Goes with
- CCI Top Bond Pallet Adhesive
- CCI Top Bond Mist Premium Pallet Adhesive
- CCI Top Bond Web Premium Pallet Adhesive
- CCI Chembond 2000 H.T.A. Two-Part Frame Adhesive Kit
- CCI Top Bond PolyGRIP Polymer Adhesive Sheet
- CCI AR-20 Adhesive Stripper
- CCI ChemCon 300 Medium Viscosity Instant Adhesive
- CCI ChemCon Adhesive Hardener Aerosol
- CCI ProChem DXP Pink Dual-Cure Emulsion (emulsions)
- CCI ProChem TX-Red Pre-Sensitized Emulsion (emulsions)
- CCI ProChem TX-Blue Pre-Sensitized Emulsion (emulsions)
- All CCI inks, chemicals, mesh and supplies
Why Buckets of Ink
We carry the CCI line, from L.T.C. plastisol and T-Charge discharge inks to water-based inks, emulsions, screen chemicals and mesh, with real answers from our Tempe, Arizona team. Call or text 480-229-7806.
CCI ChemCon 100 Low Viscosity Instant Adhesive – 1 lb
Price
Color
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
More Images
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.


