CCI CCI Chembond 2000 H.T.A. Two-Part Frame Adhesive Kit – 1 Gal CCI-CHEMBOND2000HTA-1GALKIT
Quick answer: Chembond 2000 H.T.A. is a fast-drying two-part adhesive for bonding screen mesh to frames under high tension, sold as a kit with catalyst.
Specs
| Our part # | CCI-CHEMBOND2000HTA-1GALKIT |
|---|---|
| Size | 1 Gal |
| Type | Two-part (A and B) high tension adhesive |
| Use | Bonding mesh to aluminum, wood, plastic and metal frames |
| Color | High-contrast red |
| Initial bond time | 3 to 10 minutes (frame cut-out in 3 to 7 minutes) |
| Mix ratio | 100 parts adhesive to 20 parts catalyst by weight, or 100 to 15 by volume |
| Pot life after mixing | 30 to 90 minutes in an open container |
| Full cure | 24 hours; fairly water and solvent resistant after 3 to 4 hours |
| Flash point | -17 C (1.4 F), highly flammable |
| Kit contents | 1 gallon adhesive, 25 oz catalyst, spreader, catalyst application nipple |
How to use
- Clean the frame: remove excess old adhesive and make sure surfaces are even and free of dust, oil, grease, water and solvent.
- Mix 100 parts of adhesive (Part A) with 20 parts catalyst (Part B) by weight, or 100 to 15 by volume.
- Apply the mixed adhesive and work it through the mesh so it makes full contact with the frame. Bubbles show poor contact.
- Wait for the initial bond (frame cut-out) at about 3 to 7 minutes, depending on temperature, thickness and mesh count.
- Let the adhesive cure for 24 hours before heavy solvent exposure.
Tips
- More catalyst gives greater solvent resistance and suits pre-coating the frame, but it makes the adhesive more brittle.
- Bubbles showing through the mesh mean poor contact with the frame.
- Unmixed adhesive has a long shelf life; use mixed adhesive within its 30 to 90 minute pot life.
Safety and shipping
- Highly flammable liquid and vapor. Keep away from heat, sparks and open flames; no smoking.
- May damage fertility or the unborn child; obtain special instructions before use.
- Causes serious eye irritation; may cause drowsiness or dizziness.
- The catalyst can cause allergy or asthma symptoms if inhaled and skin sensitization; use with ventilation and protective gloves.
- Shipping: Flammable liquid (class 3); ground only from Tempe, AZ.
Downloads
- CCI Chembond 2000 H.T.A. Two-Part Frame Adhesive Kit technical data sheet (PDF)
- CCI Chembond 2000 H.T.A. Two-Part Frame Adhesive Kit safety data sheet (SDS) (PDF)
FAQ
What is the mix ratio?
100 parts adhesive to 20 parts catalyst by weight, or 100 parts to 15 parts by volume.
How fast does it bond?
The initial bond takes 3 to 10 minutes, so frames can be cut out quickly.
How long does the mixed adhesive last?
Pot life is 30 to 90 minutes in an open container.
Does it contain methylene chloride?
No. The maker says it does not contain methylene chloride.
What comes in the kit?
1 gallon of adhesive, 25 oz of catalyst, a plastic spreader and an application nipple for the catalyst.
Goes with
- CCI Top Bond Pallet Adhesive
- CCI Top Bond Mist Premium Pallet Adhesive
- CCI Top Bond Web Premium Pallet Adhesive
- CCI Top Bond PolyGRIP Polymer Adhesive Sheet
- CCI AR-20 Adhesive Stripper
- CCI ChemCon 100 Low Viscosity Instant Adhesive
- CCI ChemCon 300 Medium Viscosity Instant Adhesive
- CCI ChemCon Adhesive Hardener Aerosol
- CCI ProChem DXP Pink Dual-Cure Emulsion (emulsions)
- CCI ProChem TX-Red Pre-Sensitized Emulsion (emulsions)
- CCI ProChem TX-Blue Pre-Sensitized Emulsion (emulsions)
- All CCI inks, chemicals, mesh and supplies
Why Buckets of Ink
We carry the CCI line, from L.T.C. plastisol and T-Charge discharge inks to water-based inks, emulsions, screen chemicals and mesh, with real answers from our Tempe, Arizona team. Call or text 480-229-7806.
CCI Chembond 2000 H.T.A. Two-Part Frame Adhesive Kit – 1 Gal
Price
Color
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
More Images
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.


