AlbaChem Chemicals AlbaChem S.P.I.F. II Cured Ink Remover – 32 oz ALB-1091R

    Quick answer: S.P.I.F. II is a solvent-blend cured ink remover that lifts dried plastisol, most water-based ink and adhesive from finished textiles, applied through a spot cleaning gun.

    Sizes

    32 oz 1 Gal 5 Gal 55 Gal Drum

    Specs

    AlbaChem item #1091R
    Our part #ALB-1091R
    Size32 oz
    TypeCured ink remover, solvent blend
    Use onCured plastisol, most water-based inks and adhesives on textiles
    How suppliedReady to use; no dilution
    MethodPour into the gun jar, spray from the outside of the mark toward the center, then feather the edge
    Flash pointAbove 104 F (40 C) per SDS
    Appearance / odorClear, colorless liquid; mild odor; minimal solubility in water
    Case packQuart or gallon: 4 per case, about 45 lb; pail about 55 lb; drum about 600 lb
    Maker claimsNo Prop 65 chemicals, no cancer warning, lower hazard than standard chlorinated solvents, fast drying
    Container sizes and item numbers32 oz (item 1091R); 1 Gal (item 1090R); 5 Gal (item 1092R); 55 Gal Drum (item 1094R)

    How to use

    1. Shake the container, then fill the cleaning gun jar.
    2. Lay the garment on a vacuum surface or spotting buck so solvent vapor is pulled away.
    3. Spray the stain in a circular motion, working from the outer edge toward the center.
    4. Once the mark is gone, feather out the area with a lighter mist so no hard outline is left.
    5. Repeat if ink remains, then let the fabric dry on the vacuum surface.

    Tips

    • Use a spot gun with a vacuum table; the vapor is what you are managing.
    • Test a hidden area first on stretchy or heavily dyed fabrics.

    Safety and shipping

    • Signal word Warning on the SDS (R1 version)
    • Harmful if inhaled; thermal breakdown can release hydrogen chloride and phosgene
    • Wear gloves and eye protection; use with ventilation or a vacuum table
    • Shipping: NA1993, combustible liquid, Class 3, PG III per the SDS; ships ground.

    Downloads

    FAQ

    What does S.P.I.F. II remove?

    The maker lists cured plastisol, most water-based ink and adhesives on textiles.

    Is it ready to use?

    Yes. It goes straight into the spot gun jar.

    Is it safe to ship?

    It ships ground. The SDS lists it as NA1993 combustible liquid, Class 3, PG III; drums and pails may ship by freight.

    Does it have Prop 65 chemicals?

    The maker sheet states no California Prop 65 chemicals.

    What is the difference between R and R1?

    R1 is a later version that the maker says has no PFAS ingredients; the items listed here are the R numbers.

    Goes with

    Why Buckets of Ink

    We carry the AlbaChem line, from spot cleaning fluids and guns to pallet adhesives, machine lubricants and screen reclaim chemistry, with real answers from our Tempe, Arizona team. Call or text 480-229-7806.

    AlbaChem S.P.I.F. II Cured Ink Remover – 32 oz

    Price

    Color

    Quantity

    Add to Cart

    More Images

    Shipping

    bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.

    Search
    Your cart is empty
    Search
     

    Select Size

     

    Extra Product Options

       
       
       
       
       
       
       
       
       
       

      Please enter your Layout name

       
       
       

      Select Type Of TextSelect Type Of Team nameSelect Type Of DesignSelect placeholder type

      Colors are not as solid, good when ordering low qty
      Colors are not as solid, good when ordering low qty
      Colors are not as solid, good when ordering low qty
      Colors are not as solid, good when ordering low qty
       

      Please enter your text

       

      Select a design

      Please wait while the image gallery loads

       
       
       

      Confirm Request Quote

      You will be redirected to a page where you can request a quote for this blank product. Any decorations you have added to this product will be removed.

       

      Select Product

      Select Product

        Products

         

        How many colors are in this design?

        You now have multiple elements making up this screenprint design

        Select the colors that appear in your design.

        You need to specify the total number of unique colors used across all the elements in your design.

        This helps us determine the pricing based on the number of colors in your design.

        • (plus white base)

        You can also specify the colors used in your design eg "Red", "Blue", "pantone 1809".

        If you dont tell us, our professional designer will work it out for you.

        • (plus white base)

        Currently selected Colors

         

        How many colors are in this design?

        • colored image
        • original image

        How many colors in your design?

        4 Colors

        Select the colors to be used

          COLOR PICKERS GO HERE
         

        Your Cart

        Products Qty Price
         

        Re-use existing screen print designs

        You have already used screen printing in this order. To avoid additional screen costs you can re-use an existing screen print design for this product.

        You can

        Re-use existing designs

        or

         

        WarningError

        Your layout contains images that have been resized to the point where they may appear blurred.

        Below-quality images listed

        Your layout contains images that appear outside the design area.

        You cannot save the product until you have moved the images within the design area.

        Your layout contains images that appear outside the design area.

        Your layout contains overlapping images.

        You cannot save the product until you have moved the images so they are not overlapping.

        Blank product purchase is not allowed

        You will not be able to purchase this product until you add a decoration design.

        Inactive blank product in use

        Product minimum quantity requirements not met

        You will need to increase the specified quantity to add this item to your cart.

        Process minimum quantity requirements not met

        Screen(s) still updating...

        You will not be able to purchase this item until all re-used screens have been updated.

        Your layout contains images that have been resized to meet the 25 megapixel limit for raster images and they may appear smaller than intended. You can avoid the raster size limit by uploading artwork in vector format when possible.

        By clicking OK, you are agreeing to accept the final product regardless of image quality. Click Cancel if you want to go back and fix the images.

         

        Add Team name

         

        Edit Team name.

        Add Another Team name
         

        Uploading file