Tekmar Adhesives Target TG350 PRO Spot Cleaning Gun with TurboAir 220V 50 Hz TEK-TG350P-220
Quick answer: The Target TG350 PRO adds a TurboAir drying lever to Tekmar's heavy-duty spot gun: shop air dries the cleaned area as you go, which helps stop rings. 50 watt air-cooled drive and the adjustable TG1 nozzle (Tekmar).
Sizes and options
Specs
| Tekmar item # | TG350P-220 |
|---|---|
| Size / option | 220V 50 Hz |
| Type | Electric airless spot cleaning gun with built-in air drying |
| Drive | Air-cooled, 50 watt (Tekmar) |
| Air drying | TurboAir lever (TA1 assembly); connects to shop air with the supplied hose |
| Nozzle | TG1 adjustable |
| Duty cycle | Intermittent: 15 s on / 15 s off |
| Voltage | 110V 60 Hz (TG350P) or 220V 50 Hz (TG350P-220) |
| Parts | 350P- series (2024). Pre-2021 TG350 uses 350- parts |
| Air pressure | Pre-2021 sheet: do not exceed 80 psi (2024 sheet gives none) |
| Warranty | Tekmar lifetime limited (RMA first) |
Parts for this gun
Tekmar part numbers for the TG350 PRO with prices.
How to use
- Fill the bottle about 4/5 full with an approved, non-flammable spot cleaning fluid; squeeze until it sprays.
- Lay the garment on an exhaust station screen; test colorfastness on a hidden spot.
- Push the jet through the soil in circles until it flushes out the back.
- Feather the wet edge with a wide spray and dry fast. Spray 15 seconds on, 15 seconds off.
- Empty the bottle before overnight storage.
Safety and shipping
- Never put a flammable liquid in any Tekmar spot gun. Formula TS-Special (acetone blend, flash point 7 F or lower) must NOT be used in a Tekmar TG gun. Water and water-based cleaners also void the gun warranty.
- High-pressure airless gun: never aim at skin or eyes (puncture wound risk). Wear goggles and gloves. Check the cord before every use.
- Plug only into an outlet that matches the gun's voltage.
- Shipping: UPS ground.
Downloads
- TG350 PRO manual and parts list (2024, 350P- parts) (PDF)
- TG350 PRO flyer (PDF)
- TG350 manual (pre-2021) (PDF)
- TG350 parts list (pre-2021, 350- parts) (PDF)
- TG1 nozzle instructions (PDF)
- Tekmar limited lifetime warranty (PDF)
- Cheat sheet: Tekmar spot gun parts by model (PDF)
- Cheat sheet: Tekmar spot gun troubleshooting and care (PDF)
- Cheat sheet: Tekmar spot fluids safety and shipping (PDF)
- Cheat sheet: Tekmar spot cleaning fluids and guns (existing) (PDF)
Video: Tekmar Spot Cleaning 101
FAQ
How do I stop rings?
Spray wide around the wet edge to feather it, then dry with the TurboAir lever in circles from the outside in.
What air pressure?
Tekmar's pre-2021 TG350 sheet says not over 80 psi; use a regulator. The 2024 sheet does not state a pressure.
Which fluids?
Approved non-flammable spot cleaning fluids such as TS-5 or DT-1000; never water-based or flammable.
Are old TG350 parts compatible?
Check the model year: 2024 PRO parts are 350P-, pre-2021 parts are 350-.
Can I use TS-Special in this gun?
No. TS-Special is a flammable acetone blend, and Tekmar's gun manuals forbid flammable liquids.
Goes with
- Tekmar Formula TS-5 Spot Cleaning Fluid, 1 gal
- Tekmar Formula DT-1000 DTG and DTF Spot Remover, 1 gal
- Target TG1 Adjustable Nozzle
- Target Exhaustex 2000 Spot Cleaning Station with Charcoal Filter 110V 60 Hz
- Tekmar spot gun parts finder
- Tekmar spot gun troubleshooting
Why Buckets of Ink
We carry Tekmar spot cleaning, pallet adhesive and press-side products for screen printers, with real answers from our Tempe, Arizona team. Questions on fluids, guns or parts: call 480-229-7806. Warranty repairs go through Tekmar: call 805-965-0704 or email service@tekmarltd.com for an RMA first.
Target TG350 PRO Spot Cleaning Gun with TurboAir 220V 50 Hz
Price
Color
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
More Images
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.



