Buckets of InkFree Tool · Tekmar Adhesive and Spot Cleaner Finder
Home · Tekmar · Tekmar Adhesive and Spot Cleaner Finder
Quick answer: choose your job: spray pallet adhesive is TB-10, hand-applied is TB-HV, polyester performance fabric is TB-EZ, brand RSL tees and fleece is TB-20X, cured plastisol spots are Formula TS-3 and DTG/DTF residue is Formula DT-1000.
What do you need to do?
Tekmar pallet adhesives compared
Adhesive
Best for
Application
Key facts (Tekmar)
Sizes
TB-10
Water-based pallet adhesive for tees and sweats
Spray through an applicator (Target TB 500 / TB 1000)
New synthetic polymer; tack time rivals aerosol solvent-based adhesives; reactivate by wiping with a damp sponge if lint or fleece reduce tack; no VOC, non-flammable, heat stable, non-staining
1 and 5 gal pails; 15 and 55 gal bulk
TB-HV
Hand-applied pallet adhesive (manual printers)
Hand bead and squeegee spread (applicator bottle or jug)
65% solids; heat stable up to 700 F (repeated flashing); 1/8 in bead; dries in seconds; 3-6 dozen shirts per application; 1 qt can replace up to 3 dozen 16 oz spray cans
8 oz bottle, 1 qt bottle, 1 gal jug
TB-EZ
High tack adhesive for performance (polyester) fabrics
Spray through TB 500 / TB 1000
First pallet adhesive developed for polyester performance fabrics; keeps tack through repeated flashing; performance fabrics contain silicones and Teflon additives that can make other adhesives release early; acrylic polymer
1 and 5 gal pails; 15 and 55 gal bulk
TB-EZX
Non-NPEO / APEO version of TB-EZ
Spray through TB 500 / TB 1000
Formulated to comply with marine stewardship standards set by Nike and other international clothing companies
see TB-EZ
TB-20X
RSL-approved adhesive for tees and fleece
Spray through TB500/TB1000 or apply directly
High tack, low viscosity, fast tacking, low peel; works with plastisol and water-based inks; no NPEO or APEO
1 and 5 gal pails; 15 and 55 gal bulk
TB-15
Water-based embroidery applique adhesive
Spray through TB500/TB1000
Temporary hold-down for all types of applique; polymer resists sticking to metal (less needle build-up); Tekmar claims savings of over 700% vs aerosol in its own tests
1 and 5 gal; 15 gal totes; 55 gal drums
TB-STX
Starch-based adhesive for internal tee application
Tee-Tak internal applicator
Starch based; separates after printing and dissipates as a powder; residual starch washes out
Spotter 'safe on virtually all fabrics including silks and satins'; contains Teknaklean additive; non-flammable, instant drying, non-ringing, low odor
1 gal, 5 gal packs (2 x 2.5 gal), 55 gal drums
Formula TS-3
100% of cured plastisol inks; water-based, puff and flock adhesives; flock lettering and transfers; grease and oil
Used in all cleaning guns; non-staining gun lubricant; Teknaklean additive; non-flammable, instant drying, non-ringing, low odor
1 gal, 5 gal packs, 55 gal drums
Formula TS-5
Screen printing inks and adhesives; grease, oil, dirt, cosmetics; other industrial and household stains
No methylene chloride, N-propyl bromide or perchloroethylene; no detectable flash point; not Prop 65 listed; EPA SNAP approved; non-hazardous for shipping
1 gal, 5 gal, 55 gal
Formula DT-1000
DTG inks and DTF transfers (dissolves virtually all inks and adhesives used in DTG and DTF)
Sprayed through a spot cleaning gun; same no-methylene-chloride, no-flash-point profile as TS-5
1 gal, 5 gal, 55 gal
Formula Premium 2000
Grease, oil, dirt, cosmetics; many industrial and household stains; all textile fabrics and porous material
Hand spotter or conventional spot cleaning equipment; TLV in excess of 200 ppm; not a flammable liquid; non-hazardous for shipping
1 gal, 5 gal, 55 gal
This is Tekmar of Santa Barbara, California (Technical Marketing, Ltd.), maker of screen printing adhesives, spot cleaners and applicators, not Tekmar Control Systems. Facts come from Tekmar's product pages and flyers; always read the safety data sheet. Ask Buckets of Ink for the data sheets.
Frequently asked questions
What is the difference between Tekmar TB-10 and TB-HV?
TB-10 is sprayed through an applicator such as the Target TB 1000; TB-HV is a 65% solids high-viscosity adhesive hand-applied as a 1/8 inch bead and squeegeed, good for 3 to 6 dozen shirts per application and heat stable to 700 F.
What does Tekmar TS-3 remove?
Tekmar says it removes 100% of cured plastisol inks plus water-based, puff and flock adhesives, flock lettering and transfers, and grease and oil, and is non-flammable.
Which Tekmar adhesive is for polyester performance fabric?
TB-EZ, which Tekmar says was the first pallet adhesive developed for polyester performance fabrics; TB-EZX is the non-NPEO and APEO version.
Is this the same Tekmar as the thermostat company?
No. This is Tekmar (Technical Marketing, Ltd.) of Santa Barbara, California, which makes screen printing adhesives, spot cleaners and applicators.
Need help choosing? Buckets of Ink in Tempe, Arizona can quote, ship, deliver locally or arrange pickup. Call 480-229-7806.
Built by Buckets of Ink, Tempe, Arizona · Questions? Call 480-229-7806