The Mimaki JV33-130 is a 54 in (1,361 mm print width) roll-to-roll inkjet printer that ran eco-solvent, solvent, sublimation and water-based ink. Mimaki lists the JV33 series as end of support, but thousands are still printing banners, decals and transfers. Buckets of Ink stocks JV33 parts (dampers, printheads, PCBs, cables) and ink, and quotes the current Mimaki JV330-130 when it is time to replace the machine.
Mimaki JV33-130 specifications
| Print head | On-demand piezo, 1 head (180 nozzles x 8 lines) |
|---|
| Resolution | 540 to 1,440 dpi |
|---|
| Max print width | 53.5 in (1,361 mm) |
|---|
| Max media width | 53.9 in (1,371 mm) |
|---|
| Roll weight | Under 55.1 lb (25 kg) |
|---|
| Inks | SS21 and ES3 eco-solvent, Sb53 / Sb54 sublimation, SPC-0494 water-based pigment (4- or 6-color) |
|---|
| Ink supply | 440 cc cartridges (2 per color in 4-color mode) |
|---|
| Interface | USB 2.0 |
|---|
| Power | AC 100-120 V / 220-240 V, 1,440 VA or less |
|---|
| Machine size | 90.1 x 29.1 x 56.1 in (2,289 x 739 x 1,424 mm) |
|---|
| Weight | 320 lb (145 kg) |
|---|
| Status | End of support (Mimaki); current model JV330-130 |
|---|
Specs from Mimaki; confirm options for your setup with us.
What the Mimaki JV33-130 is used for
- Banners, posters and indoor/outdoor signs
- Vehicle graphics, decals and wall graphics
- Printable heat-transfer vinyl (with a separate cutter)
- Dye-sublimation transfer paper with Sb53/Sb54 ink
Ink, parts and support
Mimaki JV33-130 FAQ
Is the Mimaki JV33-130 still supported?
Mimaki lists the JV33 series as end of support. Many parts are still available: Buckets of Ink stocks JV33 dampers, printheads, PCBs and cables. Call 480-229-7806 to match a part.
What ink does the Mimaki JV33-130 use?
Mimaki SS21 or ES3 eco-solvent, Sb53 or Sb54 sublimation, or SPC-0494 water-based pigment ink in 440 cc cartridges. Use the ink set the printer is filled with; changing ink type needs a full flush.
What is the print width of the JV33-130?
53.5 in (1,361 mm) on media up to 53.9 in (1,371 mm) wide.
What replaced the Mimaki JV33-130?
The current 54 in Mimaki eco-solvent printer is the JV330-130 (two staggered heads, SS22 ink). For print and cut, the CJV330-130.
Why is my JV33 printing with missing nozzles?
Common causes are a worn wiper or cap, an air-locked or clogged damper, or old ink. Run a test print, clean, and replace wipers and dampers before the head.
