How to use Tear Away Stabilizers
Cut a piece from a roll or use a piece of pre-cut E-Zee Tear ® Plus-Soft to fit your hoop size. Hoop by placing the embroidery stabilizer underneath the garment. Embroider the design and remove the embroidered item from the hoop. Carefully tear the excess stabilizer away to avoid excess pressure on the design.
When removing E-Zee Tear Away®, begin by pulling the excess from where there are points, such as corners or thin columns. Tear from the outer edge in towards the design, which will produce a minimum amount of pressure and the least amount of distortion to the design.
DOCUMENTS & INFORMATIONAL SHEETS
E-Zee Tear® Plus-Soft 1.8 Instructional sheet.pdf