CobraFlex DTF Powder Transfer Film 13″ Hot Peel
Premium 75-micron PET film engineered for desktop and compact DTF printers. The micro-porous matte coating delivers controlled ink absorption, clean powder adhesion, and reliable hot-peel release on every transfer. Compatible with all major DTF printers using CMYK + white water-based pigment ink.
| Width | 13 inches |
| Length | 325 feet |
| Thickness | 75 micron |
| Peel Type | Hot / Warm Peel |
| Coating | Double-sided (matte print + anti-slip feed) |
| Core | 3″ inner diameter |
Key Features
Hot Peel Release
Peel immediately after pressing for fast production throughput and a clean matte finish.
Double-Sided Coating
Matte micro-porous print surface + anti-slip reverse for jam-free feeding in roll-fed and manual printers.
75-Micron PET
Industry-standard thickness balances flexibility and rigidity for consistent feeding and smooth transfers.
Universal Compatibility
Works with Epson i3200, DX5, XP600, and other DTF printheads using water-based CMYK + white ink.
No Fabric Pretreatment
Transfer to cotton, polyester, nylon, blends, canvas, and treated leather — no pretreatment needed.
OEKO-TEK Certified
Tested and certified safe for direct contact with skin — meets global textile safety standards.
Full Specifications
| Property | Detail |
|---|---|
| Product Name | CobraFlex DTF Powder Transfer Film 13″ Hot Peel |
| SKU | CF-Film-13x325-P |
| Material | PET (Polyethylene Terephthalate) |
| Film Width | 13 inches |
| Roll Length | 325 feet |
| Thickness | 75 micron |
| Peel Type | Hot peel / warm peel |
| Coating | Double-sided — matte printable + anti-slip feed side |
| Ink Type | Water-based pigment (CMYK + White) |
| Printhead Compatibility | Epson i3200, DX5, XP600, and industrial heads |
| Adhesive Compatibility | TPU hot-melt powder |
| Inner Core Diameter | 3 inches |
| Outer Diameter | 5.4 inches |
| Fabric Compatibility | Cotton, polyester, nylon, blends, canvas, leather |
| Pretreatment Required | None |
| Certification | OEKO-TEK |
| Press Temperature | 300–325 °F |
| Press Time | 12–15 seconds |
| Storage | Cool, dry, sealed, away from sunlight |
How to Use This DTF Film
Load the 13″ roll into your DTF printer. Mirror the design in your RIP software. White ink prints first, then CMYK.
Powder
Dust the wet print with TPU adhesive powder. Shake off excess — powder bonds only to inked areas.
Cure
Pass through a curing oven or hover a heat press at 230–250 °F for 2–3 minutes to melt the adhesive.
Press & Peel
Place face-down on garment. Heat press at 300–325 °F for 12–15 sec. Peel while hot for a matte finish.
Ideal For
The 13″ width is purpose-built for compact and desktop DTF printers — the entry point for custom apparel shops, side hustles, and small-batch producers. Use it for individual custom orders, sample runs, small-logo left-chest prints, sleeve hits, and hat transfers where a full 24″ roll would be overkill.
It's also the go-to film for shops that run a dedicated 13″ printer alongside a larger production unit — keeping your small-job workflow separate and efficient.
Frequently Asked Questions
Will this film work with my DTF printer?
Yes. CobraFlex 13″ film is compatible with all DTF printers that accept 13-inch media and use water-based CMYK + white pigment ink — including Epson i3200, DX5, and XP600 printhead systems.
Is this hot peel or cold peel?
This roll is hot peel (also works as warm peel). You peel the film immediately after pressing for faster production throughput with a matte finish.
What fabrics can I transfer onto?
Cotton, polyester, nylon, cotton-poly blends, tri-blends, canvas, treated leather, and more. No pretreatment is needed on the garment.
How many transfers can I get from one roll?
It depends on design size. A 325-foot roll gives you significant output — hundreds of standard-size chest prints or thousands of small logos and tags.
What adhesive powder should I use?
Use standard TPU (thermoplastic polyurethane) hot-melt adhesive powder. Buckets of Ink carries CobraFlex DTF adhesive powder that pairs perfectly with this film.
How should I store unused film?
Keep the roll sealed in its original packaging in a cool, dry location. Avoid direct sunlight and dusty environments to prevent print defects.
Can Buckets of Ink deliver this same day?
Yes. We offer same-day delivery across the Phoenix metro area. Call 480-229-7806 to place your order.
Related DTF Film
Need DTF Film Fast?
Same-day delivery in Phoenix. Bulk pricing available. CobraFlex authorized dealer.
Add to Cart Call 480-229-7806
