23×31 shur-loc® E-Z Endurance 125 Series Frame with Endurance Bars
The shur-loc® “E-Z” Endurance Frame is the most advanced frame system that we have ever created. Utilizing our patented Endurance Technology, the “E-Z” Endurance frame is setting a new standard of durability in a screen printing frame. When the Endurance frame is matched with the revolutionary Endurance Panel, printers will experience a new level of perfection in their screens. From optimal mesh tension to the protective barrier that surrounds the edges of the fabric panel, there has never been a more profitable way to print.
The Endurance Tension Bars feature an all new mesh attachment system that offers printers the ability to retension their mesh up to 8 different times, extending the life of the fabric and allowing the screen to maintain an optimal tension longer than ever before. The patented Endurance Edge Protection is resistant to most chemicals and virtually eliminates edge breakage. It also provides a 360 degree permanent blockout around the perimeter of the fabric.
The new Endurance Tensioning Rods are more resistant to chemicals than any other shur-loc® connector before them. Retensioning your fabric panels is also possible with the Endurance system. If tensions drop below the recommended levels, simply insert an additional rod outside of the pocket to slightly increase tension. When more is needed, move the rod to the inside of the pocket and increase your tension further. This can be done on all four sides, giving you 8 different tension level increases when you need them or when you just want to dial in your fabric to that perfect tension on your press.
The cost 23×31 shur-loc® “E-Z” 125 Series Endurance Frame is almost 40% less than a comparable retensionable frame and is nearly 25% lighter in weight. The flat tube construction allows the 125 series frame to be clamped in securely to any press without the use of adapters. The 125 series open corner design allows for “E-Z” accessories like the “E-Z” Pin Registration Plate or the “E-Z” Mesh ID Tag to be easily attached to the frame.
Experience how the 125 series Endurance Frame can make your business more profitable than ever before by eradicating the need of high priced tapes, while delivering longer lasting, optimal tensioned mesh on every frame you stretch.
Excellent registration Quality – Precision woven with proprietary threads and manufacturing methods to assure you of the highest quality prints possible.
Balanced warp and weft stress/strain curves helps create a mesh that withstands multiple forces that occur during the print process.
Smartmesh is a low elongation mesh – it also resists accumulated elongation as the print progresses and the forces of the squeegee warms up the mesh.
Woven with precise square openings which helps control moire.
Mesh above 280 threads per inch is surface treated to improve ink flow and emulsion adhesion of fine details.
High retained tension properties helps Smartmesh avoid losing excessive amounts of tension common on inferior mesh. Static stretch and glue frames retain a workable tension for a longer more useful screen life.
Shur Loc Fabric System