K-Laser A-Magic K-Laser A-Magic Pattern Foil T3ZBRA Zebra Clear – 25 in x 200 ft Roll AMA-T3ZBRA-25"x200'
Quick answer: K-Laser A-Magic T3ZBRA Zebra Clear is a printed pattern foil: the pattern repeats across the roll, supplied as a 25 in x 200 ft roll. It transfers with screen-printed foil adhesive and a heat press, so you can add a metallic or special-effect finish to apparel and other textiles. Use it for full-fill graphics, accents and all-over looks such as camo, leopard, tie dye or rainbow.
Roll size
25 in x 200 ft25 in x 400 ft25 in x 1,000 ft
This listing is the 25 in x 200 ft roll. The 12.5 in roll of the same foil is listed separately; it is a 25 in master roll cut in half, so choose it for a narrower press or lower volume.
Specifications
| Brand / maker | K-Laser A-Magic Textile Foils (K Laser Technology USA) |
|---|---|
| Foil code | T3ZBRA |
| Foil name | Zebra Clear |
| Type | Pattern foil |
| Family | Zebra |
| Roll size | 25 in x 200 ft |
| Roll width | 25 in |
| Roll length | 200 ft |
| Apply with | Screen-printed foil adhesive and heat press, color side up |
| Platen temperature | Under 305 F |
| Pressure | Medium to firm |
| Dwell time | 8 to 15 seconds |
| Peel | Warm or cold |
| Ships from | Tempe, Arizona |
Which one do I need?
T3ZBRA Zebra Clear is a printed pattern foil: the pattern repeats across the roll.
Use it for
- full-fill graphics, accents and all-over looks such as camo, leopard, tie dye or rainbow
- Screen-printed foil adhesive artwork on textiles
Do not use it for
- Direct printing: it is a transfer foil, not an ink
- Jobs where you cannot test the adhesive and foil together first
Pick this one when
Pick this when you want a printed pattern (not a holographic sparkle) across the whole design.
Most common mistake
Treating a pattern foil like a solid: the repeat is part of the look, so place the design so the pattern reads well.
Nearby foils to compare
S5ZBRA Zebra Bright Silver.
How to apply
- Screen print your artwork with foil adhesive (60 to 110 mesh, thicker stencil, well-mixed adhesive, screen at proper tension).
- Print, flash, print, then a smoothing screen, or two print strokes then a smoothing screen.
- Place the foil color side up over the printed area.
- Press at medium to firm pressure for 8 to 15 seconds, platen under 305 F.
- Rub lightly with a soft cloth and peel, warm or cold.
This is the typical process. Test the foil with your adhesive and fabric before a production run.
Downloads
Why buy K-Laser A-Magic foil from Buckets of Ink
- Authorized K-Laser dealer: genuine A-Magic textile foil.
- Foil and adhesive people answer the phone: call or text 480-229-7806.
- Ships from Tempe, Arizona, with local pickup.
- Order the matching adhesive and heat press supplies on the same order.
FAQ
How do I apply K-Laser A-Magic T3ZBRA Zebra Clear foil?
Screen print your design with a foil adhesive, place the foil color side up over the printed area, and press it. The maker settings are a medium to firm press at 8 to 15 seconds, with the platen kept under 305 F. Rub lightly with a soft cloth, then peel warm or cold.
How hot can I press this foil?
Stay under 305 F. The foil itself does not need heat to transfer; the adhesive needs heat and time to become tacky, so follow your adhesive maker for its exact setting. Too much heat can damage the foil color and its release.
What mesh count should I print the adhesive with?
The maker suggests a screen between 60 (24 cm) and 110 (43 cm) mesh, a stencil thicker than normal for better coverage, a well-mixed adhesive, and a screen at proper tension. Print, flash, print, then smooth, or use two print strokes and then a smoothing screen.
What is the difference between the 25 in and 12.5 in rolls?
They are the same foil. The 12.5 in roll is a 25 in master roll cut in half, so you get a narrower roll for smaller presses and smaller jobs at about half the price of the wide roll.
Does K-Laser publish washing instructions for this foil?
Not in its selection guide. Wash durability depends mostly on the foil adhesive, its cure and the fabric, so follow your adhesive maker for cure and wash guidance and test a sample before a production run.
Can I test the foil before buying a full roll?
Yes. The maker sells a swatch book with a 3 x 5 sample of every foil, and we can help you pick a roll size. Call 480-229-7806.
K-Laser A-Magic Pattern Foil T3ZBRA Zebra Clear – 25 in x 200 ft Roll
Price
Color
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
More Images
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.


