You Name It, We Sell It Inks, Supplies, Equipment

Contact Login / Register Cart

WM Plastics Inc AP DK Gray Ink Qt. JB2275AP-Q

    Dk. Gray Screen Printing Ink

    Dk. Gray JB2275AP-Q Screen Printing Ink  

    WM Plastics Dk. Gray AP Screen Printing Ink is an all-purpose plastisol screen printing ink specifically formulated for high-productivity wet-on-wet printing. It’s a premium plastisol ink with a smooth and creamy consistency.

     

    Screen Printing Plastisol Ink

    Wm Plastics Dk. Gra screen-printing plastisol inks are perfect for all screen-printing shops, large or small. Our inks are very good on automatic screen printing presses and manual screen printing presses.

    Non-phthalate Plastisol (Midori Series) All-purpose (AP) inks are formulated to be directly printed onto white or light-colored, 100% cotton garments. AP inks can also be used on dark-colored garments if an underlay is used; this is the suggested method for dark-colored shirts to achieve a soft hand.

      • Bleed Resistance: None
      • Opacity: Low to Medium
      • Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
      • Mesh: 110-305 (43 to 120 threads per cm)
      • Stencil: Any direct emulsion or capillary film. Wet-on-Wet Printing: Can be printed wet-on-wet to increase production.
      • Modifications: To reduce viscosity,y use Curable Reducer (I10-9906), improve stretch,h use G&S Base
      • Modifications: To reduce viscosity,y uses Curable Reducer (I10-9906), to improve stretch,h uses G&S Base (I10-1020), pdf,f uses Puff Additive (I10-9903), extend colo,r uses Soft-hand Base (I10-0111, and& for suede puff or dulling,g use Suede Additive (I10-9907).
      • Squeegee Hardness & Angle: Medium to hard at a 45-degree angle.
      • Flashing: 700ºF for 3-5 seconds, just enough for the surface to be back-free. The Squeegee Blade is sharp.
      • Fusion/Curing: 325 F/163 C for 1 to 1 ½ minutes. The oven temperature can be increased, and dwell time can be decreased. For heat presses, use 390 F/195 C for 8 seconds.
      • Wash-up: Any plastisol cleaner.
      • Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, increase temperature and dwell time. Do not dry clean, and always test the fabric to be printed.

    DK Gray All Purpose Ink Qt. JB2275AP-Q specifications

    Brand / series WM Plastics Midori non-phthalate plastisol, All Purpose (AP)
    Best on White or light 100% cotton; darks over an underlay
    Mesh 110-305
    Flash 700 °F 3-5 sec, until tack free
    Cure 270-325 °F (132-163 °C) for 1 to 1.5 min; heat press 390 °F (195 °C) for 8 sec
    Opacity Medium
    Bleed resistance None
    Squeegee Medium to hard, 45°, sharp edge
    Storage 65-80 °F, out of direct sunlight
    Wash-up Any plastisol cleaner

    Other sizes: gallon

    Modify it: Soft-hand Base · G&S Base · Puff Additive

    Downloads: Safety Data Sheet (PDF) · WM ink tech catalog (PDF)

    Ask about volume discounts · 480-229-7806 · pick up in Tempe, AZ

    FAQ

    What garments is DK Gray All Purpose Ink Qt. JB2275AP-Q for?
    White or light 100% cotton; darks over an underlay.

    How do I cure DK Gray All Purpose Ink Qt. JB2275AP-Q?
    270-325 °F (132-163 °C) for 1 to 1.5 min; heat press 390 °F (195 °C) for 8 sec. If the print rubs off or cracks, raise the temperature or dwell time.

    Is it phthalate free?
    Yes. It is part of WM Plastics' Midori non-phthalate plastisol line.

    AP DK Gray Ink Qt.

    Price

    Color

    Size

    Quantity

    Add to Cart

    More Images

    Related Products

    Shipping

    bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.

    Latest Products

    Search
    Your cart is empty
    Search
     

    Select Size

    OK
    Cancel
     

    Extra Product Options

      OK
       

      Please wait
       

      Processing image

       
       

      Processing image

        Please wait
       

      Making embroidery-ready copy

      Please wait
       

      Generating embroidery preview

      Please wait
       

      Analyzing Colors

      Design colors are being analyzed for the selected decoration process

       
       

      Saving Item

      Please wait as your item is saved.

       
       

      Please enter your Layout name

      OK
      Cancel
       
       
      OK
       

      Select Type Of TextSelect Type Of Team nameSelect Type Of DesignSelect placeholder type

      Colors are not as solid, good when ordering low qty
      Colors are not as solid, good when ordering low qty
      Colors are not as solid, good when ordering low qty
      Colors are not as solid, good when ordering low qty
      Cancel
       

      Please enter your text

      Add Text
      Cancel
       

      Select a design

      Please wait while the image gallery loads

      Cancel
       

      Confirm Copyright Permission


      In order to use a design you must have the full rights to it. If you are unsure or have any doubts, please confirm your ownership or seek permission from the copyright owner.

      When you save a design, you are agreeing to the following terms:

      • I hold commercial rights to reproduce the design.
      • If for any reason the legal owner of this design contacts fulfillment house, they will be directed to me.
      • I understand illegal use of third-party copyright content is a serious offence and can lead to penalties.
      OK
      Cancel
       

      Warning


      The uploaded image was resized to meet the 25 megapixel limit for raster images. The image may appear to be smaller than intended. You can avoid the raster size limit by uploading artwork in vector format when possible.

      OK
      Cancel
       

      Confirm Request Quote

      You will be redirected to a page where you can request a quote for this blank product. Any decorations you have added to this product will be removed.

      OK
      Cancel
       

      Select Product

      Select Product

        Products

        Cancel
         

        How many colors are in this design?

        You now have multiple elements making up this screenprint design

        Select the colors that appear in your design.

        You need to specify the total number of unique colors used across all the elements in your design.

        This helps us determine the pricing based on the number of colors in your design.

        • (plus white base)

        You can also specify the colors used in your design eg "Red", "Blue", "pantone 1809".

        If you dont tell us, our professional designer will work it out for you.

        • (plus white base)

        Currently selected Colors

        OK
         

        How many colors are in this design?

        • colored image
        • original image

        How many colors in your design?

        4 Colors

        Select the colors to be used

          COLOR PICKERS GO HERE
        OK
         

        Your Cart

        Products Qty Price
        Start New Design
        Check out
        Back
         

        Re-use existing screen print designs

        You have already used screen printing in this order. To avoid additional screen costs you can re-use an existing screen print design for this product.

        You can

        Re-use existing designs

        or

        Cancel
         

        WarningError

        Your layout contains images that have been resized to the point where they may appear blurred.

        Below-quality images listed

        Your layout contains images that appear outside the design area.

        You cannot save the product until you have moved the images within the design area.

        Your layout contains images that appear outside the design area.

        Your layout contains overlapping images.

        You cannot save the product until you have moved the images so they are not overlapping.

        Blank product purchase is not allowed

        You will not be able to purchase this product until you add a decoration design.

        Inactive blank product in use

        Product minimum quantity requirements not met

        You will need to increase the specified quantity to add this item to your cart.

        Process minimum quantity requirements not met

        Screen(s) still updating...

        You will not be able to purchase this item until all re-used screens have been updated.

        Your layout contains images that have been resized to meet the 25 megapixel limit for raster images and they may appear smaller than intended. You can avoid the raster size limit by uploading artwork in vector format when possible.

        By clicking OK, you are agreeing to accept the final product regardless of image quality. Click Cancel if you want to go back and fix the images.

         

        Add Team name

        Next
        Cancel
         

        Edit Team name.

        Add Another Team name
        OK
        Cancel
         

        Uploading file