Buckets of InkFree Tool · Vastex Equipment Comparison
Home · Vastex · Vastex Equipment Comparison
Quick answer: Vastex's dryers run from the 1,625 W D-100 (110+ shirts/hr plastisol) to the 46,800 W EconoRed VI-78 (2,700+/hr); its flash units run from the 1,625 W F-100 to the 4,300 W AirFlash; its LED exposing units fit screens from 20 x 24 in to 52 x 36 in.
Infrared conveyor dryers compared
| Dryer | Size | Wattage | Plastisol/hr | Water-based/hr |
|---|
| D-100 | 16 in heater | 1,625 W | 110+ | 50+ |
| D-100-WL | 16 x 18 in heater | 1,875 W | 110+ | 50+ |
| D-1000 | 16 x 20 in heater | 2,050 W | 110+ | 50+ |
| LittleRed X2-30 | 30 in belt | 5,200 W | 260+ | 90+ |
| LittleRed X2-54 | 54 in belt | 10,400 W | 520+ | 180+ |
| LittleRed X3-30 | 30 in belt | 7,800 W | 360+ | 120+ |
| LittleRed X3-54 | 54 in belt | 15,600 W | 720+ | 240+ |
| EconoRed II-30 | 30 in belt | 7,200 W | 300+ | 100+ |
| EconoRed III-30 | 30 in belt | 10,800 W | 450+ | 150+ |
| EconoRed II-54 | 54 in belt | 14,400 W | 600+ | 200+ |
| EconoRed III-54 | 54 in belt | 21,600 W | 900+ | 300+ |
| EconoRed III-78 | 78 in belt | 23,400 W | 1350+ | 450+ |
| EconoRed VI-30 | 30 in belt | 15,600 W | 900+ | 300+ |
| EconoRed VI-54 | 54 in belt | 31,200 W | 1800+ | 600+ |
| EconoRed VI-78 | 78 in belt | 46,800 W | 2700+ | 900+ |
Flash cure units compared
| Model | Heater | Power | Electrical | Notes |
|---|
| F-100 | 16 x 16 in (41 x 41 cm) | 1,625 W @ 120V or 240V | 120V/12A or 240V/6.5A | On/off switch, head leveler, heat shields; 5-yr heater, 2-yr defect warranty |
| RedFlash RD-18-120 | 18 x 18 in | 1,950 W @ 120V | 120V/15.6A, NEMA 5-20P | Digital percentage timer; ultra slim 2.75 in head; flashes plastisol in as little as 4 sec |
| RedFlash RD-18-240 | 18 x 18 in | 2,600 W @ 240V | 240V/12A, NEMA 6-15P | As above |
| RedFlash RD-18-240-HO | 18 x 18 in | 3,500 W @ 240V (high output) | 240V/16A, NEMA 6-20P | As above |
| RedFlash RD-1824-240 | 18 x 24 in | 3,500 W @ 240V | 240V/16A, NEMA 6-20P | As above |
| AirFlash RAD-18-240 | 18 x 18 in | 3,500 W @ 240V | 240V/16A, NEMA 6-20P | 140 CFM blower, adjustable heat and air, heat shield; flash plastisol in as little as 4 sec |
| AirFlash RAD-1824 | 18 x 24 in | 4,300 W @ 240V | 240V/22A, NEMA L6-30P (plug sold separately) | As above; head only / standard / AutoFlash versions |
LED exposing units compared
| Model | Largest screen | Light bars | Contact | Controls |
|---|
| E20-2024 | 20 x 24 in | (2) 15 in bars | Lid with pressure pad | One touch |
| E200-2128 | 21 x 28 in | (4) 15 in bars | Lid with vacuum | One touch |
| E200-2331-HO | 23 x 31 in | (4) 30 in bars | Lid with vacuum | One touch |
| E2-2536 | 25 x 36 in | (6) 30 in bars | Lid with ring blower | LCD touchscreen, 10 presets |
| E2-5236 | 52 x 36 in | (12) 30 in bars | Lid with ring blower | LCD touchscreen, 10 presets |
Vastex sources: D-Series, LittleRed X2/X3, EconoRed, flash cure and E-Series brochures on vastex.com (2020 to 2026 revisions). Production ratings are Vastex estimates on 16 in centers. Vastex publishes one brochure per product line; this page puts the lines side by side. Quote-only equipment.
Frequently asked questions
What is the difference between RedFlash and AirFlash?
RedFlash is a high-wattage, high-coil-density heater with a cooling fan and air curtain and a 2.75 in slim head; AirFlash adds a 140 CFM filtered blower so heat and air flow are both adjustable. Both flash plastisol in as little as 4 seconds.
Which Vastex exposing unit fits a 23 x 31 in screen?
The E200-2331-HO takes screens up to 23 x 31 in; the E2-2536 takes up to 25 x 36 in.
Do dryers cure DTF adhesive?
Vastex lists the EconoRed VI and the ERVP series for DTF and recommends an exhaust hood, strongly for DTF adhesives, on the D-100 and D-1000.
Need help choosing? Buckets of Ink in Tempe, Arizona can quote, ship, deliver locally or arrange pickup. Call 480-229-7806.