Screen Reclaim Troubleshooting Finder: Ghosting, Haze, Fish-Eyes and Stuck Emulsion

Buckets of InkFree Tool · Screen Reclaim Troubleshooting Finder

Home › Screen printing › Kor-Chem › Reclaim troubleshooting

Screen reclaim goes wrong in a handful of predictable ways. Pick yours and see the Kor-Chem product, ratio and steps the maker publishes for it. Nothing here is invented: every row cites the Kor-Chem data sheet or 2026 product guide.

What is wrong with my screen?

9 problems shown

ProblemKor-Chem product and methodSource
Ghost image or stain left after reclaimGIR-4U Plus (caustic; stubborn locked-in stains, soak 30 sec to 3 min), Pink Scrub (non-caustic paste, dwell up to 10 min), ProClean (stain remover + degreaser), or Bio-1Kor-Chem 2026 guide p.7; TDS 01500, 01409, 01474
Fish-eyes or pinholes when coatingDegrease with DG-520 (1:20, 1 minute, rinse until none remains) or prep with Pink Scrub; let the screen dry completely before coatingTDS 01643, 01409
New stretched mesh will not coat evenlyDG-520 at 1:20 on every newly stretched screen; Pink Scrub is non-caustic and described as ideal for new fabricTDS 01643, 01409
Ink will not come off the screenCard excess ink first and work on a dry screen, then Bio-1, Bio-4, Bio-7 or Bio-11 (as supplied, spray, agitate, cold high-pressure rinse). PC-175/PC-450 list eight ink types for wash-upTDS 01459, 01446, 01654, 01628; guide p.8
Emulsion will not stripApply remover to both sides, use the stronger end of the ratio (ER-190 1:45, ER-130 1:10, ER-1-2-5 1:2), dwell up to 3 minutes; or use Complete or CP-2 for ink and emulsion togetherTDS 01486, 01453, 01484, 01450, 01449
Foam problems in an automatic reclaimerMaker lists non-foaming ER-160, TigerStrip 200, Bio-M and TigerWash 100 for automatic reclaimGuide p.5-6
Image clogged or color change on pressPC-235, PC-205, ProTex, ProWash (spray or wipe, wipe dry, test print on scrap); Press Wash 5050 or PC-175/PC-450 for all ink typesTDS 01642, 01640, 01467; guide p.8
Dirty squeegee or flood barZero-Ink Wash (squeegee and flood bar wash, dilute 2:1 per guide) or ProWashGuide p.5, TDS 01640
Need a low-VOC reclaim programMaker's Rule 1171 program: ProWash or Press Wash 5050; Bio-1, Bio-7 or Bio-11; any Kor-Chem emulsion remover (all 0% VOC); Pink Scrub or ProClean; DG-520Guide p.3 and p.12

The four-step reclaim in one line

Ink removal, then emulsion removal, then stain (haze) removal, then degrease, with a press wash during the run. Always card ink off first, rinse cold with low volume and high pressure, never mix chemicals, and let the screen dry before coating. See the Kor-Chem line or call 480-229-7806.

Frequently asked questions

How do I remove ghost images from a screen?

Kor-Chem lists GIR-4U Plus for stubborn locked-in ghost images, and Pink Scrub or ProClean for lighter stains, after ink and emulsion are removed.

What causes fish-eyes in emulsion?

Kor-Chem says a clean, degreased screen helps reduce fish-eyes and pinholes; DG-520 and Pink Scrub are its prep products.

Which reclaim products are low VOC?

Kor-Chem's Rule 1171 program uses ProWash or Press Wash 5050, Bio-1, Bio-7 or Bio-11, any of its emulsion removers, Pink Scrub or ProClean, and DG-520.

Built by Buckets of Ink, Tempe, Arizona · Questions? Call 480-229-7806
Search
Your cart is empty
Search