Franmar Screen Cleaning Chemical Chooser: Which Product for Your Job

Buckets of InkFree Tool · Franmar Chemical Chooser

Home › Franmar › Chemical chooser

Franmar makes a separate remover for each screen job. Pick what you need to clean and see the matching Franmar product and the maker's key notes. All facts come from Franmar's own tip sheets.

What do you need to clean or remove?

16 matches

JobFranmar productWhat Franmar says
Plastisol screensFranmar BEAN-e-doo Plastisol Ink RemoverSoy-based, low-VOC, 100% biodegradable; do not dilute; rinse with water.
Any textile ink, with or without additivesFranmar Greeneway Multipurpose Ink RemoverAlso usable for on-press color changes and as a screen opener; dilution suits plastisol only.
Dried water-based inkFranmar Aqua-Wash Water-Based Ink RemoverVirtually no odor, non-caustic, drain-safe; not for keeping ink wet during a run.
Solvent-based inkFranmar Wash-Away Solvent Ink RemoverLow-odor replacement for mineral spirits; do not dilute; keep off mesh adhesive.
UV inkFranmar UV Ink RemoverLow odor; leaves an oily residue, use D-GREASE.
Color change on press / clogged meshFranmar Color Change On Press Ink RemoverNon-aerosol; wipe on, wipe off, dry thoroughly.
Remove stencil (ready to use)Franmar STRIP-e-doo Emulsion RemoverBuilt-in degreaser; color change white to brown means used up.
Remove stencil (concentrate)Franmar STRIP-e-doo ConcentrateDilute 1:19; 1 quart makes 5 gallons.
Locked emulsion or capillary filmFranmar UN-Lok Screen UnlockerGel stays wet up to 24 hours; usually 30 minutes or less.
Ink and emulsion in one step (dip tank)Franmar One Step ClearMix 6:1; soak 3-5 minutes.
Ghost / hazeFranmar D-HAZE Haze RemoverDoes not damage mesh; keep off frame edges.
Stubborn or old ghostFranmar D-HAZE Haze Remover GelGel clings; an hour or longer for old images.
Haze on screens you will catalog with stencilFranmar Haze Remover ESFranmar says safe to use on emulsion; no caustic agents.
Degrease before coatingFranmar D-GREASE Screen DegreaserAlcohol-free, non-caustic; helps prevent fish-eyes.
Pallet adhesive build-upFranmar Ickee Stickee UnstuckSpray on, wait, wipe; water or D-GREASE for residue.
Light scorch on white cottonFranmar Scorch-e-dooLight scorches on white 100% cotton only.

How Franmar numbers the steps

Franmar's tip sheets number the reclaim order: Step 1 ink removal, Step 2 emulsion removal, Step 3 haze and ghost removal, Step 4 degreasing before recoating.

Frequently asked questions

Which Franmar product removes plastisol ink?

BEAN-e-doo Plastisol Ink Remover: made with soybeans, low-VOC and 100% biodegradable per Franmar. Rinse with water because it does not evaporate.

Which Franmar product removes emulsion?

STRIP-e-doo (ready to use) or STRIP-e-doo Concentrate (1:19 dilution). For locked emulsion, UN-Lok Screen Unlocker.

Which Franmar product removes haze?

D-HAZE, D-HAZE Gel for stubborn ghosts, or Haze Remover ES, which Franmar says is safe on emulsion.

Is this chooser official Franmar advice?

The matches summarize Franmar's tip sheets. Franmar's current tip sheet and SDS govern; call us at 480-229-7806 with questions.

Built by Buckets of Ink, Tempe, Arizona · Questions? Call 480-229-7806
Search
Your cart is empty
Search