E-Zee Embroidery Backing Chooser: Which Stabilizer for Your Fabric

Buckets of InkFree Tool · E-Zee Backing Chooser

Home › Embroidery › Stabilizers › Backing Chooser

Quick answer: the fabric decides the type of backing and the design decides the weight. Use cut away on knits and unstable fabric, tear away on tightly woven fabric like denim, twill and caps, wash away for very stretchy or open fabrics, and add a water soluble topping on fleece, terry and other napped fabrics. Heavier backing for dense designs, lighter for open ones. Everything here comes from Madeira's E-Zee Backing and Topping guide.

Which E-Zee backing for my fabric?

26 fabrics shown

FabricBacking (Madeira)ToppingNotesShop E-Zee
Jersey (cotton or blend knit)
T-shirts, sportswear, bedding
Cut awayNone listedMatch the cut away weight to what the design needs: heavier for dense designs, lighter for open ones.1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
Blended or waffle knit
Sweaters and sweatshirts
Medium to heavy cut awayWater soluble topping for clean, crisp designsStretchy knits cup or ripple without a good cut away layer.1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
Aqua Supreme topping
Pique
Polo shirts
Low profile, medium weight cut awayWater soluble topping so stitches do not get lost in the nap1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
Aqua Supreme topping
Polyester performance knit
Moisture wicking athletic apparel
Low profile medium weight cut away paired with a lightweight tear awayNone listedStretchy, slippery and very unstable. Choose smaller, less dense designs. Madeira: one layer of performance backing stabilizes designs up to 7,000 stitches; use 2 layers above 7,000. A temporary spray adhesive may help hooping.Performance backing
1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
1.0 oz · 1.5 oz · 1.8 oz tear away
Polyester performance pique
Moisture wicking athletic apparel with texture
Low profile, medium weight cut awayWater soluble toppingPerformance backing
1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
Aqua Supreme topping
Fleece
Jackets, vests, blankets
One or two pieces of a lightweight, no-show backingWater soluble topping for clean, crisp designs1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
Aqua Supreme topping
French terry
Lounge shirts and pants, bathrobes
Medium weight cut awayWater soluble topping1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
Aqua Supreme topping
Velour
Pajamas, tracksuits
Cut awayWater soluble or heat away topping for design clarity1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
Aqua Supreme topping
Dress shirt fabrics: broadcloth, cotton blends, oxford cloth
Dress shirts, skirts
Lightweight, thin no-show cut away (oxford: low profile, medium weight)None listedSmaller designs work best on lighter fabrics.1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
Linen-cotton blend
Clothing, curtains, napkins, tablecloths
No-show cut away; or a soft, lightweight tear away when the reverse side will be seen and not worn against skinNone listedSmaller designs work best.1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
1.0 oz · 1.5 oz · 1.8 oz tear away
Nylon
Sportswear, jackets, flags
Lightweight cut awayNone listedSmaller designs and adjusted digitizing keep puckering to a minimum.1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
Ripstop
Tents, banners, jackets, hiking gear
Lightweight cut awayNone listed1.5 oz · 2.0 oz · 2.5 oz · 3.0 oz · 3.1 oz cut away
Nylon webbing (open weave)
Pet collars, lanyards, sporting goods
A true wash awayNone listedAdditional digitizing may be needed to cover the open areas.Wash away
Canvas or duck cloth, denim
Totes, bags, footwear, jeans, jackets
Tear away: heavier for larger, denser designs and lighter for smaller, less dense designsNone listedVery stable fabrics.1.0 oz · 1.5 oz · 1.8 oz tear away
Twill
Jeans, chinos, bags, baseball caps
Heavy weight tear awayNone listedFor caps, Madeira makes E-Zee Cap backing: heavy weight tear away cut into narrow strips for cap frames. Using more than one piece helps keep the material close to the needle plate and reduces needle deflection.1.0 oz · 1.5 oz · 1.8 oz tear away
Cap backing
Corduroy
Pants, jackets
Tear awayWater soluble topping keeps stitches from sinking into the nap1.0 oz · 1.5 oz · 1.8 oz tear away
Aqua Supreme topping
Soft shell
Jackets, outdoor wear
Tear awayNone listedTear away gives the stability needed even for heavier, denser designs.1.0 oz · 1.5 oz · 1.8 oz tear away
Upholstery
Tablecloths, curtains, totes, wall decor, pet bedding
Medium or heavy weight tear away matched to fabric weight and designNone listed1.0 oz · 1.5 oz · 1.8 oz tear away
Faux leather, vinyl and leather
Jackets, purses, upholstery
Tear awayNone listedLimit high-density designs, which tend to perforate these materials. Madeira says to use a clamping type hoop with leather.1.0 oz · 1.5 oz · 1.8 oz tear away
Terry cloth
Towels, bathrobes
Soft tear awayWater soluble topping1.0 oz · 1.5 oz · 1.8 oz tear away
Aqua Supreme topping
Waffle weave (honeycomb)
Towels, bathrobes, blankets
Soft tear awayNone listed1.0 oz · 1.5 oz · 1.8 oz tear away
Satin
Gowns, pillows
Soft tear away; one with adhesive can helpNone listedLightweight, slippery and hard to hoop.1.0 oz · 1.5 oz · 1.8 oz tear away
Specialty (adhesive, mesh, film)
Velvet
Eveningwear, children's dresses, pillows, throws
Soft tear awayHeat away topping for design clarityHoop burns are hard to remove: Madeira suggests embroidery spray adhesive and laying the fabric on top instead of hooping.1.0 oz · 1.5 oz · 1.8 oz tear away
Specialty (adhesive, mesh, film)
Super stretchy and slippery fabrics
Lycra and spandex
Wash awayNone listedMadeira lists wash away as optimal for these.Wash away
Infant and children's wear
Baby garments, soft goods
E-Zee Weblon Mesh cut away: medium weight polyester mesh, suitable for infant and children's wearNone listedBacking finishers cover the reverse side of the embroidery and give a smooth surface for sensitive skin, for babywear, intimates and leisure apparel.Specialty (adhesive, mesh, film)
Backing finishers
Free-standing lace, heirloom and cutwork
Stand-alone designs
Wash away (or Badgemaster water soluble film)None listedRinsed away completely with warm water.Wash away
Specialty (adhesive, mesh, film)

The four backing types

  • Cut away: excellent stability during and after embroidery; trim the excess with scissors and it stays with the design. Soft against skin. Best for knits and lightweight wovens.
  • Tear away: temporary stability that softens over time, so the fabric must support the design on its own. Best for heavy twill, denim, home decor, canvas and duck cloth.
  • Wash away: temporary support removed with warm water or laundering. Best for Lycra and spandex, and for lace and cutwork.
  • Heat away (films): for stand-alone patches and badges, and lighter films as a backing or topping on delicate fabrics such as satin and velvet when water is not an option.

Weight and removal tips from Madeira

  • Larger, higher-stitch-count designs with heavy fill need a heavier backing. Open designs with mostly running stitches need a lighter one. Medium weights suit designs in between.
  • Trimming cut away: hold the backing and let the garment drape so you do not nick the fabric, and leave a small border around the design.
  • Tearing tear away: start at points such as corners or thin columns and tear from the outer edge in toward the design to minimize distortion.
  • Hooping: the fabric should be snug in the hoop with no movement. Too tight puckers the design; too loose loses registration.
  • Pair the backing with the right needle: ballpoint on knits, sharp point on tightly woven fabric and caps (see the needle size chart).

Choosing thread too? Try the Madeira thread chooser and calculator. Browse everything in embroidery stabilizers and backing or see all Madeira products.

Not sure which backing fits your job? Buckets of Ink is in Tempe, Arizona (906 S Priest Dr, Suite 101) with same-day pickup, Phoenix-metro delivery and fast shipping. Call 480-229-7806, ask a question, or ask about our discounts and starter packages.

Source: Madeira USA, E-Zee Guide: Backing and Topping, and the Madeira Needle Guide. Madeira's recommendations are general guidelines; test on your own garment and design.

Frequently asked questions

What is the difference between cut away and tear away backing?

Madeira says cut away backing gives excellent stability during and after embroidery and mostly stays with the design for the life of the garment, so it is best for unstable and stretchy fabrics such as knits and lightweight wovens. Tear away gives temporary stability and softens over time, so it is for tightly woven fabrics such as heavy twill, denim and canvas.

What backing do I use on T-shirts and polo shirts?

Madeira recommends cut away on knits. For jersey, match the cut away weight to the design. For pique (polos), use a low profile, medium weight cut away and a water soluble topping.

What backing do I use for baseball caps?

Madeira lists a heavy weight tear away for twill, and makes E-Zee Cap backing, a heavy weight tear away cut into narrow strips for cap frames. Using more than one piece helps keep the material closer to the needle plate and reduces needle deflection. Madeira also says to use sharp-point needles on caps.

Does the weight of the backing matter?

Yes. Madeira says fabric construction decides the type of backing and the design decides the weight: use a heavier backing for larger, denser designs and a lighter one for open designs with fewer stitches.

When do I need a topping?

Madeira recommends a water soluble topping on napped or piled fabrics such as fleece, sweaters, corduroy and terry so stitches do not sink, and a heat away topping or film on velvet and similar fabrics where water should not be used.

What is the best backing for performance wear?

Madeira suggests a thin but strong cut away made for performance wear. One layer stabilizes designs up to 7,000 stitches and two layers are used above that. Choose lighter designs and expect hooping to take practice.

Where can I buy E-Zee backing in Arizona?

Buckets of Ink at 906 S Priest Dr, Suite 101, Tempe, AZ stocks E-Zee cut away, tear away, cap, performance and wash away backing and toppings for same-day pickup, local delivery or shipping. Call 480-229-7806.

Built by Buckets of Ink, Tempe, Arizona · Questions? Call 480-229-7806
Search
Your cart is empty
Search