Chromaline Exposure Time Finder: Emulsion and Film Starting Times

Buckets of InkFree Tool · Chromaline Exposure Time Finder

Home › Brands › Chromaline › Exposure Time Finder

Pick your Chromaline emulsion or film, mesh and coat, and get the starting exposure time from Chromaline's own user guides. Times are the maker's suggested starting points for a 5 kW lamp at 40 inches (or a QuickImage LED unit where noted). They are a guide, not a guarantee: bulb age, mesh color and your unit change the answer, so always confirm with the 10-Step Exposure Guide or a step test.

Find your starting exposure time

1.00 = the Chromaline reference. After you run your own step test, enter your result divided by the table value (for example 0.8 if your lamp is 20% faster) to reuse it for other screens.

30 sec starting point, 5 kW at 40 in. Suggested minimum exposure time.

All starting exposure times in one table

Product, mesh, coatStarting exposureLight source
ChromaLime, 110 yellow mesh, 1x130 sec5 kW at 40 in
ChromaLime, 110 yellow mesh, 1x240 sec5 kW at 40 in
ChromaLime, 110 yellow mesh, 1x350 sec5 kW at 40 in
ChromaLime, 230 yellow mesh, 1x120 sec5 kW at 40 in
ChromaLime, 230 yellow mesh, 1x225 sec5 kW at 40 in
ChromaLime, 230 yellow mesh, 1x330 sec5 kW at 40 in
ChromaLime, 390 yellow mesh, 1x115 sec5 kW at 40 in
ChromaLime, 390 yellow mesh, 1x220 sec5 kW at 40 in
ChromaLime, 390 yellow mesh, 1x325 sec5 kW at 40 in
ChromaLime, 110 white mesh, 1x1 (LED)10 sec to 20 secQuickImage LED
ChromaLime, 110 yellow mesh, 1x1 (LED)18 sec to 22 secQuickImage LED
ChromaBlue, 110 white mesh (LED)13 sec to 17 secQuickImage LED
ChromaBlue, 110 yellow mesh (LED)14 sec to 28 secQuickImage LED
Hydro-X, 110 white mesh, 1x1 (LED)7 sec to 14 secQuickImage LED
Hydro-X, 110 yellow mesh, 1x1 (LED)10 sec to 28 secQuickImage LED
Magna/Cure UDC-HV, 158 yellow mesh, 1x260 sec to 90 sec5 kW at 40 in
Magna/Cure UDC-HV, 230 yellow mesh, 1x245 sec to 60 sec5 kW at 40 in
Magna/Cure UDC-HV, 305 yellow mesh, 1x230 sec to 45 sec5 kW at 40 in
CP2, 230 yellow mesh, 1x230 sec to 60 sec5 kW at 40 in
Pro/Cap 15 film32 sec to 42 sec5 kW at 40 in
Pro/Cap 18 film36 sec to 48 sec5 kW at 40 in
Pro/Cap 25 film45 sec to 60 sec5 kW at 40 in
Pro/Cap 30 film50 sec to 65 sec5 kW at 40 in
Pro/Cap 38 film65 sec to 85 sec5 kW at 40 in
Pro/Cap 50 film90 sec to 120 sec (2.0 min)5 kW at 40 in
Razor film 15 micron10 sec to 40 sec5 kW at 40 in
Razor film 18 micron15 sec to 45 sec5 kW at 40 in
Razor film 25 micron20 sec to 50 sec5 kW at 40 in
Razor film 40 micron / Quick Film 40 micron40 sec to 70 sec5 kW at 40 in
Super PHAT 100 micron50 sec5 kW at 40 in
Super PHAT 150 micron100 sec5 kW at 40 in
Super PHAT 200 micron150 sec (2.5 min)5 kW at 40 in
Super PHAT 250 micron200 sec (3.3 min)5 kW at 40 in
Super PHAT 300 micron230 sec (3.8 min)5 kW at 40 in
Super PHAT 400 micron300 sec (5.0 min)5 kW at 40 in
Super PHAT 700 micron550 sec (9.2 min)5 kW at 40 in

How to set your real exposure time

  1. Coat, dry and degrease as the product guide says, and work under yellow light.
  2. Use the Chromaline 10-Step Exposure Guide or the Exposure Calculator with your own unit.
  3. For dual cure emulsions such as Magna/Cure UDC-HV, Chromaline advises overexposing a test stencil first, then reducing the time until image quality is acceptable, because an underexposed dual cure stencil can look fine and still break down early on press.
  4. Write the winning time and the correction factor on the screen log.

Source: Chromaline user guides (ChromaLime 2025, ChromaBlue 2025, Hydro-X 2022, Magna/Cure UDC-HV 2026, CP2 2020, Pro/Cap 2025, Razor 2026, Quick Film 2026, Super PHAT 2026). Reference only; the current Chromaline guide governs.

Frequently asked questions

How long should I expose ChromaLime?

Chromaline's guide gives 30, 40 or 50 seconds for a 110 yellow mesh coated 1x1, 1x2 or 1x3 on a 5 kW lamp at 40 inches, and 10-20 seconds on 110 white mesh on a QuickImage LED unit. Confirm with a step test.

Why is my exposure time different from the chart?

Chromaline says times vary with the equipment used, bulb age and shop conditions. Use the 10-Step Exposure Guide to find your own time.

What is the correction factor for?

After a step test, divide your best time by the table time. Multiply other table times by that factor on the same unit. The factor is yours, not a Chromaline spec.

Built by Buckets of Ink, Tempe, Arizona · Questions? Call 480-229-7806
Search
Your cart is empty
Search