BR4D-V54-Infrared Conveyor Dryers-BigRed 4D [Add-On Cubes] -BigRed4D-V54 Cube Only. 240V, 22,800w.  Adds 4.5' (137 cm) of heat. 1 or 3 phase.

BigRed 4D - 30" & 54" (440-480V upgrade $1,000) Crating Included

BigRed4D-V30, 240V, 11,400w. 30" Belt x 8.75' Long (76 cm x 275 cm). 1 or 3 phase.

BROCHURE & SPECIFICATIONS

BigRed^® 4D Series dryers in 30 and 54 in. (76 and 137 cm) belt widths are the largest and most powerful dryers engineered specifically for DTG digital inks as well as screen-printed plastisols, water-based inks, discharge and/or DTF adhesives, making them ideal for Kornit^® and other high-volume DTG shops, as well as automatic screen printing operations requiring high capacities, and DTF printing in high volumes. The modular design allows for expandability to easily add chambers and conveyor length as production needs increase.

Model BR4D-V30 with a 30 in. (76 cm) wide belt and four 24 in. (61 cm) wide heaters (total 11,400 watts) cures 72 garments/h printed with DTG/digital white ink at 2.5 minutes dwell time, 216 garments/h with water-based ink or discharge, and 475 garments/h with plastisol ink or DTF adhesives.

Model BR4D-V54 with a 54 in. (137 cm) wide belt and four 48 in. (122 cm) wide heaters (total 22,800 watts) cures 144 garments/h printed with DTG/digital white ink at 2.5 minutes dwell time, 432 garments/h with water-based ink or discharge, and 950 garments/h with plastisol ink.

The heaters of the BigRed 4D dryers carry a 15-year warranty, and feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under curing associated with conventional units.

All BigRed D Series dryers feature a high-powered pre-heating zone that surges ink temperatures past 300°F (149°C) within the first several inches of conveyor travel, maximizing dwell time at optimum curing temperatures and, in turn, conveyor belt speeds and dryer output.

OPTIONS

• Additional heating chambers @ 54 in. (137cm) long
• Belt extensions, front or rear @ 18 in. (46 cm) long
• Side heaters to increase "cure zone"
• Control box on left side (right side standard)
• 3 Phase and 208, 380, 480 voltages
• Exhaust hood for extra fume extraction
• Hat support rail
• Locking casters for mobility
• Heavy duty motor drive for conveyor belts
• Donut probe
• Additional heater clearance

FAST

• 475 - 950+ plastisol shirts/hr*
• 216 - 432+ water-based or discharge shirts/hr*
• 72 - 144+ DTG shirts/hr* with digital white ink

SMART
-Unique cooling bed at exit cools as garments exit the chamber.

SAFE
-Light tower to monitor dryer status, cool-down mode for easier shut-down and fault detection on the exhaust.

QUIET
-The new BigRed 4D models are 20% quieter than earlier models.

ACCURATE
-Temperature controller accurate to +/-1°F (+/-0.5°C) Digital PID with fuzzy logic — industry's most advanced.

ADJUSTABLE
-Hand crank raises or lowers all heating chambers simultaneously to within 2" - 7" (5 - 17.7 cm) of the belt for bulky items or hats. Models with side heaters can be adjusted from 4 to 7 in. (10 - 17.8 cm) from belt to heater.

CONVENIENT
-Digital belt speed voltmeter — a must have.

VERSATILE
-Make-up Air and Negative Exhaust Air — removes moisture and fumes ultra-fast.

FILTERED
-Filtered air intake prevents dust contamination of images. Filtered exhaust prevents garment lint from entering the blower or exhaust stack.

HEAVY DUTY
-"X-Series" Conveyor Belt Tracking System.

BELT WIDTH
-(Maximum garment width)
30" (76 cm) or 54" (137 cm)

HEATER WIDTH
-24" (61 cm) or 48" (122 cm)

MAXIMUM IMAGE WIDTH
-18 in. (46 cm) or 42 in. (107 cm)
(Heater width minus 6 in. [15 cm])

EXPANDABLE
-Add heat chambers and belt extensions