WM Plastics Inc Brute White Low Temp & Low Cure Qt. I309890-Q
Brute White Screen Printing Ink-Qt
Brute White Screen Printing Ink-Qt LC Series is WM’s most versatile series on the market, enabling printers to print on the most difficult substrates. Not only does this system hold up to the worst bleeders, but at the lower cure temps it could save a shop a ton of money in reduced energy costs.
Screen Printing Plastisol Ink
Wm Plastics Brute White Brute White 100% Polyester is our best bleed resistant white and has the best coverage than any of our other whites. This is a must have white for all those troublesome garments that are prone to dye migration. While the body of this white is heavier than our other whites, it still prints easily, lays down flat and provides a soft feel. Tested and proven this white is sure to work on the toughest garments. Low cure temp plastiol ink.
Non-Phthalate/PVC Plastisol Inks (LC Inks)
-
- The LC Series is WM’s most versatile series on the market, enabling printers to print on the most difficult substrates. Not only does this system hold up to the worst bleeders, but at the lower cure temps it could save a shop a ton of money in reduced energy costs.
-
- Bleed Resistance: Excellent
-
- Opacity: High
-
- Storage: 70 to 80 F. Due to the ability to cure at low temperatures, this is extremely important. Ink will become thicker over time but can be reduced to a printable viscosity.
-
- Mesh: 61-230
-
- Stencil: Any direct emulsion or capillary film.
-
- Wet on Wet Printing: Can be printed wet-on-wet to increase production.
-
- Modifications: Modifications are not recommended unless completely necessary. To reduce viscosity, use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020) & puff use Puff Additive (I10-9903). ANY modification will effect Low Cure properties.
-
- Squeegee Hardness & Angle: Medium to hard at a 45-degree angle.
-
- Flashing: 700ºF for 3-5 seconds, just enough for the surface to be tack free. Squeegee Blade: Sharp.
-
- Fusion/Curing: 230º º F/121 C for 1 ½ – 2½ minutes. º º 325 F/163 C for 1 to 1 ½ minutes.
-
- Wash-up: Any plastisol cleaner.
-
- Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.
Brute White Low Temp & Low Cure Qt, specifications
| Brand / series | WM Plastics Midori non-phthalate plastisol, White |
| Best on | Underlay and highlight white; see series for poly/bleed resistance |
| Mesh | 86-300 (by white) |
| Flash | 700 °F 2-5 sec, until tack free |
| Cure | 270-325 °F (132-163 °C) for 1 to 1.5 min; heat press 390 °F (195 °C) for 8 sec |
| Opacity | High |
| Bleed resistance | Varies by white |
| Squeegee | Medium to hard, 45°, sharp edge |
| Storage | 65-80 °F, out of direct sunlight |
| Wash-up | Any plastisol cleaner |
Other sizes: 5 gal
Modify it: Soft-hand Base · G&S Base · Puff Additive
Downloads: Safety Data Sheet (PDF) · WM ink tech catalog (PDF)
Ask about volume discounts · 480-229-7806 · pick up in Tempe, AZ
FAQ
What garments is Brute White Low Temp & Low Cure Qt, for?
Underlay and highlight white; see series for poly/bleed resistance.
How do I cure Brute White Low Temp & Low Cure Qt,?
270-325 °F (132-163 °C) for 1 to 1.5 min; heat press 390 °F (195 °C) for 8 sec. If the print rubs off or cracks, raise the temperature or dwell time.
Is it phthalate free?
Yes. It is part of WM Plastics' Midori non-phthalate plastisol line.
Free tools: Not sure which white to run? Try our White Ink Chooser · Which White for Which Fabric cheat sheet (PDF) · Safety & Technical Data Sheets
WM Plastics LC Brute White I30-9890
LC Brute White I30-9890 is a WM Plastics white plastisol for low cure: cotton, poly, nylon, stretch. Per the WM catalog, print through 61-230 mesh, flash for 3-5 sec and cure at 230 F 1.5-2 min up to 325
Brute White Low Temp & Low Cure Qt.
Price
Color
Size
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.






