Easiway Systems Easistrip Supra One Step Ink Cleaner and Emulsion Remover Gal (Dip Tank) EAS-Supra-G
Easiway EasiStrip SUPRA One Step Ink Cleaner & Emulsion Remover Gallon: what it is
An ultra-concentrated dip-tank chemical that takes plastisol ink and emulsion off the screen in one soak. Mix 1 part SUPRA to 7 parts water in an Easiway dip tank; no separate degreasing step is needed after the final rinse.
Best for: Easiway dip tank systems (PT-506, PT-525, PT-520 and others); One-step ink and emulsion removal; Plastisol and water-based inks.
How to use EasiStrip SUPRA One Step Ink Cleaner & Emulsion Remover
- Fill the dip tank 2/3 with water, then add SUPRA at 1 part chemical to 7 parts water, leaving room to submerge screens.
- At the end of the run, scrape off excess ink and pull the tape.
- Submerge the screen fully for 30 seconds to 1 minute, or until ink and emulsion loosen.
- Lift out and tilt to drain back into the tank.
- Pressure-wash both sides (substrate side first).
- If emulsion residue, ink or stains remain, spray EasiSolv 701N, scrub and pressure-rinse.
- Finish with a low-pressure flood rinse; no extra degreasing needed.
Easiway EasiStrip SUPRA One Step Ink Cleaner & Emulsion Remover Gallon specifications
| Size | Gallon |
| Part # | EAS-Supra-G |
| Type | Dip-tank ink cleaner and emulsion remover concentrate |
| Mix ratio | 1 part SUPRA : 7 parts water |
| Soak time | 30 seconds to 1 minute (current TDS) |
| Ink types | Plastisol, water-based |
| Tank fill examples | PT-506 (14 gal): 2 gal SUPRA + up to 12 gal water; PT-525 (25 gal): 4 gal + up to 21 gal; PT-520 (37 gal): 5 gal + up to 32 gal |
| pH | 2-3 (TDS); 2.2-2.8 (SDS) |
| VOC | None / zero |
EasiStrip SUPRA One Step Ink Cleaner & Emulsion Remover safety summary
- Signal word: Danger
- Hazards: Causes serious eye damage (H318); skin irritation and possible allergic skin reaction (H315, H317); may damage thyroid with long or repeated ingestion (H373); harmful to aquatic life (H402). Contains an oxidizer (sodium metaperiodate).
- Protection: Splash goggles/face protection, apron, chemical-resistant gloves up to the elbow; respirator for acids/oxidizers if misted or poorly ventilated.
- Flash point: Not applicable (TDS)
- VOC: None
- California Prop 65: None: no components on the CA Prop 65 list.
- Storage: Keep tightly closed; cool, dry, well ventilated, away from caustics and oxidizers; store locked up, ideally in an area for acids and oxidizers; ambient temperature.
- Shipping: Not DOT regulated (SDS section 14: NA); TDS: DOT non-hazardous.
EasiStrip SUPRA One Step Ink Cleaner & Emulsion Remover downloads (SDS, TDS, instructions)
- Easiway Systems Technical Data Sheet (current, 2026 upload)
- Easiway Systems SDS (v9.1, Sep 13 2023)
- Easiway Systems Dip Tank Instructions (2024)
- Easiway Systems How to Use Your Easiway Dip Tank card (2025)
Easiway dip tank system with EasiStrip SUPRA video
Works with EasiStrip SUPRA One Step Ink Cleaner & Emulsion Remover
- Easiway PT-525 DIP TANK (25 Gal)
- Easiway 701N Screen Wash & Stain Remover Qt
- Easiway PlastiSolv 842 Screen & Press Wash Gal
EasiStrip SUPRA One Step Ink Cleaner & Emulsion Remover FAQ
What is the Easiway SUPRA dip tank mix ratio?
1 part EasiStrip SUPRA to 7 parts water.
How long do I soak screens in Easiway SUPRA?
30 seconds to 1 minute, or until the ink and emulsion loosen, then pressure-wash both sides.
How much SUPRA do I need for a PT-525 dip tank?
Easiway's chart says 4 gallons of SUPRA with up to 21 gallons of water.
Do I need to degrease after using Easiway SUPRA?
No. Easiway says after the final flood rinse the screen is reclaimed with no extra degreasing step.
Easistrip™ Supra One Step Ink Cleaner and Emulsion Remover
Easistrip Supra One Step Ink Cleaner and Emulsion Remover Gal (Dip Tank)
Price
Color
Size
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.


