Easiway Systems EasiSolv 500 Stencil Remover 5-Gal Mixed 1:25 EAS-500-5G
Easiway EasiSolv 500 Stencil Remover Concentrate 5 Gallon: what it is
A liquid emulsion remover concentrate that you mix with water. It quickly breaks down direct emulsions, capillary films and high-density films, and it contains degreasers.
Best for: Reclaiming screens after the ink is cleaned off; Direct emulsion, capillary film and high-density film; Shops that want to set their own strength (1:10 to 1:50).
How to use EasiSolv 500 Stencil Remover Concentrate
- Clean the ink off the screen first.
- Mix 1 part 500 with 10 to 50 parts water; Easiway suggests starting at 1:20 and adjusting.
- Apply to both sides of the stencil by brush, wipe, scrub pad or spray, and scrub.
- Let it sit about 1 minute.
- Pressure-rinse both sides.
- Flood-rinse the whole screen from the top with low pressure to clear debris, splashback and chemical.
Easiway EasiSolv 500 Stencil Remover Concentrate 5 Gallon specifications
| Size | 5 Gallon |
| Part # | EAS-500-5G |
| Type | Emulsion / stencil remover concentrate (contains degreasers) |
| Mix ratio | 1:10 up to 1:50 with water; start at 1:20 |
| Removes | Direct emulsions, capillary film, high-density film |
| Works on / compatible | Screens printed with plastisol, water-based, silicone, UV/solvent, conductive, industrial inks |
| pH | 1-2 (TDS); 2-2.5 at 10% solution (SDS) |
| Flash point | Not applicable |
| VOC | None |
EasiSolv 500 Stencil Remover Concentrate safety summary
- Signal word: Danger
- Hazards: Causes severe skin burns and eye damage (H314, Skin Corr. 1A); may damage thyroid with long or repeated ingestion (H373); harmful to aquatic life (H402). Contains oxidizers (periodic acid, sodium metaperiodate); corrosive to metals per maker test.
- Protection: Splash goggles/face protection, apron, chemical-resistant gloves and protective clothing; respirator for acids/oxidizers if misted or poorly ventilated.
- Flash point: Not applicable
- VOC: None
- California Prop 65: None: no components on the CA Prop 65 list.
- Storage: Keep tightly closed; cool, dry, well ventilated, away from caustics; store locked up, ideally in an area for acids and oxidizers; ambient temperature.
- Shipping: Regulated: UN3264, Corrosive liquid, acidic, inorganic, n.o.s. (periodic acid), Class 8, PG III. TDS: ships hazardous over 5 gal.
EasiSolv 500 Stencil Remover Concentrate downloads (SDS, TDS, instructions)
EasiSolv 500 stencil remover concentrate video
Works with EasiSolv 500 Stencil Remover Concentrate
- Easiway PlastiSolv 842 Screen & Press Wash Gal
- Easiway 701N Screen Wash & Stain Remover Qt
- EasiSolv 51 Stencil Remover Gal (Ready To Use)
EasiSolv 500 Stencil Remover Concentrate FAQ
How do I mix Easiway EasiSolv 500 stencil remover?
Mix 1 part EasiSolv 500 with 10 to 50 parts water. Easiway says start at 1:20 and adjust to your needs.
How long should EasiSolv 500 sit on the screen?
About a minute after scrubbing it in on both sides, then pressure-rinse both sides.
Is EasiSolv 500 ready to use?
No. It is a concentrate and must be mixed with water. For a ready-to-use remover, see EasiSolv 51.
Is Easiway EasiSolv 500 corrosive?
Yes. The SDS lists it as corrosive (causes severe skin burns and eye damage), so wear goggles, gloves and an apron.
What does EasiSolv 500 remove?
Direct emulsions, capillary films and high-density films.
Easiway™ 500 Stencil Remover Concentrate
EasiSolv™ 500 Stencil Remover Concentrate is a revolutionary, liquid, emulsion remover concentrate that is engineered to quickly and aggressively dissolve all direct emulsions, capillary, and high-density films with ease. Mixes with water 1:10 and up to 1:50.
Pairs with: PT-525 dip tank. Need a full screen room setup? Quote a washout station · 480-229-7806
EasiSolv 500 Stencil Remover 5-Gal Mixed 1:25
Price
Color
Size
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.






