How Do You Keep Multicolor Screen Prints in Registration?

Home › Ask Buckets › Screen printing registration

CB
Chris BreazealeOwner, Buckets of Ink · Tempe, AZ
Short answer

Print bold, clear registration marks in the corners of your film positives, use micro-registration on the press, and add pin or tab registration. Prints drift when screens are not clamped properly, a screen is warped, off-contact or squeegee pressure is off, or flashing temperature and too little spray adhesive on the platen let the shirt move.

Micro-registration and big, bold registration marks

Many machines have a micro-registration on them that adjusts forward, back, left and right. One of the key components in lining up any multicolor design is making sure the film positives have registration marks in the corners, just outside the image area, that are large enough, clear enough and bold enough. When they print that clearly, it's simpler to line up the colors. One reason printers take longer to register a design is that the registration marks are very small. When they're a little bigger, it's much easier to print and make sure the colors line up on each registration mark.

Pin registration and tab registration

Pin registration is another important system. It can be done through an exposure unit, which then transfers directly to the screen and to the printing press. The same goes for tab registration.

Why prints shift out of registration

Some of the most common reasons prints shift out of registration: the screens aren't clamped properly; the screen may be warped; pressure and off-contact; squeegee pressure and angle; and, on a multicolor job, your flashing temperature and the product shrinking or moving because there isn't enough spray adhesive down on your platen.

Products mentioned

Frequently asked questions

How big should registration marks be?

Large enough, clear enough and bold enough, in the corners just outside the image area of the film positive. When they print clearly it is simpler to line colors up, and small marks are one reason printers take longer to register a design.

What is pin registration?

A registration system that can be done through an exposure unit, which then transfers directly to the screen and to the printing press. The same goes for tab registration.

Why does my multicolor print shift out of register?

Common reasons: screens not clamped properly, a warped screen, off-contact and squeegee pressure and angle, and, on a multicolor job, flashing temperature and not enough spray adhesive on the platen so the product shrinks or moves.

Related: Screen printing exposure units · Vastex manual presses · Platens · Screen tension

Have a question for our shop? Call or text 480-229-7806 (Monday to Friday, 7:30 AM to 4:00 PM Arizona time) or send us a message. Want to see a machine run? Visit our demo room in Tempe, AZ during the same hours. In-stock orders placed by 2:30 PM Arizona time ship the same day from Tempe, AZ. Need equipment? Get a quote.We Bring the Store to Your Door.

← More straight answers from our Tempe shop

Search
Your cart is empty
Search