Home › Ask Buckets › Flash dryer between colors
CB
Chris BreazealeOwner, Buckets of Ink · Tempe, AZ
Short answerA flash unit makes a printed color non-tacky so the next screen does not pick up ink and cause a blurry or double image. Speed, temperature and height above the platen matter. Use the conveyor dryer, set by belt speed and temperature, to fully cure the ink.
What flashing does
Flash units are extremely important to manual printing, and on an Anatol automatic press. Speed, temperature and height above the platen all matter. You do not want to overcure it when you're printing other colors down on top of it. You want it non-tacky, so it will not transfer ink when the next screen comes down.
When you do not need to flash
For most customers who print in their own shop, flashing is a key point to keeping blurriness away. Otherwise ink from the other colors transfers onto the back of the screen, which then transfers back onto the shirt and causes a blurry or double image. There are some designs where you don't need to flash, because you can print with your squeegee and it isn't affecting that area, or you're using a high enough mesh that it's not transferring back onto the back of the other screen.
A simple trick: Camie 610 on the back of the screen
One simple trick: spray Camie 610 silicone spray on the back of the screens. It helps give a release and doesn't allow ink to build up on the back of the screen when you're printing wet on wet.
Flash units for a home business
You can dry shirts with your flash unit for a home business. I recommend keeping it up a little high above the platen and letting the shirt sit under it for a minute or two, making sure with a wash test that you've dialed it in. Different garments (sweatshirts, polyester, cotton, tri-blends) each have a sweet spot where your logo will not crack and fall off.
The conveyor dryer
The conveyor dryer is the best option, setting belt speed and temperature to make sure the ink is cured. Buckets of Ink has the full breakdown and cheat sheets on all the cure times and temps, whether that's flashing or going down the conveyor dryer, for inks like WM Plastics or Wilflex.
Products mentioned
Frequently asked questions
Why do you flash between colors?
To keep blurriness away. Without a flash, ink from the other colors can transfer onto the back of the next screen and then back onto the shirt, causing a blurry or double image.
Do you always need to flash?
No. Some designs print fine without flashing, either because the squeegee does not affect that area or because the mesh is high enough that ink does not transfer back onto the screen.
What is the Camie 610 trick?
Spray Camie 610 silicone spray on the back of your screens to give a release, so ink does not build up there when you print wet on wet.
Related: Plastisol cure temperature chart · What size Vastex conveyor dryer? · Screen print bleeding and fuzzy edges
Have a question for our shop? Call or text
480-229-7806 (Monday to Friday, 7:30 AM to 4:00 PM Arizona time) or
send us a message. Want to see a machine run? Visit our demo room in Tempe, AZ during the same hours. In-stock orders placed by 2:30 PM Arizona time ship the same day from Tempe, AZ. Need equipment?
Get a quote.
We Bring the Store to Your Door. ← More straight answers from our Tempe shop