DTF Curing Oven: Overcuring, Shaker Combos and Fume Extractors

Home › Ask Buckets › DTF curing oven and fume extractor

CB
Chris BreazealeOwner, Buckets of Ink · Tempe, AZ
Short answer

Set time and temperature so the film does not overheat or go wavy, and you can still peel the transfer off by hand and pass a stretch test. The adhesive should look like orange peel, not sandy and gritty. Chris recommends a fume extractor for sure.

Do not overcure: the peel and stretch test

With DTF printers and the curing dryer, it is very important that your time and temperature throughout the chamber are not causing the film to overheat and develop a wavy texture. That is overcuring the film and the ink. Set your time and temperature so you can still peel the transfer off by hand and do a stretch test. That is one good test that your transfer is at the right temperature. Also look at the adhesive: you want an orange-peel effect, not a sandy, gritty effect, which is undercured.

Shaker combo or separate units?

Is it better to have a combo printer/dryer/shaker, or separate units? Either is worth it, based on your productivity. Many customers use a separate drying unit when they begin at home, which is totally fine. The problem is whether it extracts any fumes. You want to make sure you're exhausting and extracting the fumes from the PET film, the powder adhesive and the moisture coming off the ink. A fume extractor on a vertical drying unit, or on a belt-driven powder shaker and dryer unit, is super important. After a period of time, the fumes can give you a headache, so it's best that they are extracted, especially if you're in a small, confined space. A fume extractor is recommended, for sure.

Products mentioned

Frequently asked questions

How do you know a DTF transfer is cured at the right temperature?

You can still peel the transfer off by hand and pass a stretch test. The adhesive should have an orange-peel effect rather than a sandy, gritty look, which is undercured.

Is a combo printer, dryer and shaker worth it?

Either a combo or separate units is worth it based on your productivity. Many customers start at home with a separate drying unit, which is totally fine.

Do you need a fume extractor for DTF?

Yes. You want to exhaust the fumes from the PET film, the powder adhesive and the moisture coming off the ink. After a time, fumes can cause headaches, especially in a small, confined space.

Related: DTF air purifiers · DTF printer maintenance · How to store DTF film, powder and ink

Have a question for our shop? Call or text 480-229-7806 (Monday to Friday, 7:30 AM to 4:00 PM Arizona time) or send us a message. Want to see a machine run? Visit our demo room in Tempe, AZ during the same hours. In-stock orders placed by 2:30 PM Arizona time ship the same day from Tempe, AZ. Need equipment? Get a quote.We Bring the Store to Your Door.

← More straight answers from our Tempe shop

Search
Your cart is empty
Search