Franmar Chemicals D-Haze Remover FSPDH1GEAWDT1
Franmar D•HAZE Haze Remover: what it is
A ghost and haze remover for screen mesh, used as Step 3 of Franmar's screen reclaim system after the emulsion is off. Franmar says that, unlike caustic haze removers, it will not damage mesh however long it sits. For screen printers clearing ghost images and ink stains so screens can be reused.
Best for: Ghost images and haze left after emulsion removal; Step 3 of the Franmar reclaim system (after STRIP•e•doo); Shops that want a non-caustic haze remover that will not harm mesh.
How to use D•HAZE Haze Remover
- Use right after emulsion/stencil removal so the haze does not set in the mesh.
- Spray or pour a small amount onto the ghost/haze area (a spray bottle helps control the amount).
- Keep it off the frame edges: it will remove the glue that holds mesh to the frame.
- Scrub both sides with a dedicated Biggee scrub pad or a nylon brush.
- Rinse clean with pressure water; use D•GREASE Screen Degreaser to remove any residue.
Franmar D•HAZE Haze Remover specifications
| Part # | FSPDH1GEAWDT1 |
| Type | Ghost and haze remover (Step 3) |
| Mix ratio | Use as supplied (spray or pour) |
| pH | 8.1 |
| Flash point | Above 200°F / 93°C (PMcc) |
| VOC | 39.18% (408.11 g/L, 3.41 lb/gal) |
| Appearance / odor | Gold-yellow liquid, mild odor |
| Main ingredients | N-methyl pyrrolidone 35-49%, dibasic ester 35-49%, ethoxylated alcohol blend 12-16%, soy ester 10-13% |
| Biodegradability | Readily biodegradable (OECD 301E, >90% DOC removal) |
| Works on / compatible | Screen mesh; keep off frame adhesive |
D•HAZE Haze Remover safety summary
- Signal word: DANGER
- Hazards: Skin irritation (H315), serious eye irritation (H319), may cause respiratory irritation or drowsiness (H335), may damage fertility or the unborn child (H360), may be harmful if swallowed (H302).
- Protection: Neoprene or equivalent gloves and chemical goggles (SDS); tip sheet recommends butyl rubber or laminated PE/EVOH gloves.
- Flash point: Above 200°F / 93°C (PMcc)
- VOC: 39.18%, 408.11 g/L, 3.41 lb/gal
- California Prop 65: Yes: N-methyl pyrrolidone and methanol (birth defects/reproductive harm), 1,4-dioxane (cancer).
- Storage: Keep away from strong oxidizers. Freezing point below 32°F.
- Shipping: Not regulated / not classified as dangerous for transport.
D•HAZE Haze Remover downloads (SDS, TDS, instructions)
- Franmar SDS D•HAZE (Ver. 4.5, rev. 11/18/2025)
- Franmar Tip sheet D•HAZE, Step 3 (rev. 3/30/2023)
- Franmar product page
D-HAZE haze remover (reclaim Step 3) video
Works with D•HAZE Haze Remover
- Strip-e-doo Emulsion Remover Gallon
- Bean-e-doo Plastisol Ink Remover Gallon
- Greeneway Multipurpose Ink Remover Gallon
- Blue Biggie Scrub Pad
D•HAZE Haze Remover FAQ
How do I use Franmar D-Haze to remove ghost images?
Right after stripping the emulsion, spray a small amount on the ghost, scrub both sides with a Biggee pad or nylon brush, then pressure-rinse.
Will Franmar D-Haze damage screen mesh if left on too long?
Franmar says D-Haze will not damage mesh no matter how long it stays on. Do keep it off the frame edges because it dissolves mesh adhesive.
Is Franmar D-Haze caustic?
No. Franmar positions it as an alternative to caustic haze removers. pH is 8.1 per the SDS.
What gloves should I wear with D-Haze haze remover?
Franmar recommends butyl rubber or laminated PE/EVOH gloves plus chemical goggles. It carries a DANGER signal word and a Prop 65 warning.
What is the flash point of Franmar D-Haze?
Above 200°F (93°C) closed cup. It is not regulated for shipping.
Franmar D-Haze Ghost Remover
Franmar’s Haze Remover is one of the safest and most effective ghost and haze removers in the industry today. Unlike traditional caustic haze removers, Haze Remover will not damage screen mesh no matter how long you leave it on. Good haze removal practices save screen printers money with longer usability of screens.
D-Haze Remover
Price
Color
Size
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.






