CCI ProChem® TX-Blue Emulsion CCI-TX-Blue
Chemical Consultants Inc ProChem® TX-Blue Pre-Sensitized Emulsion: what it is
A blue, one-part, pre-sensitized photopolymer textile emulsion with 45% solids. No diazo to mix and it exposes fast. Made for plastisol; the tech sheet also lists discharge and water-based inks.
Best for: Plastisol textile printing; Long print runs; Fast stencil making with no diazo mixing.
How to use ProChem® TX-Blue Pre-Sensitized Emulsion
- Degrease the mesh first (a CCI degreaser such as Nutralyze) and let it dry fully.
- Work under yellow safelight. TX-Blue is pre-sensitized: use it straight from the pail, no diazo to mix.
- Coat 1-2 passes on the print side, then 1-2 passes on the squeegee side with a clean, smooth-edged scoop coater; add coats for a thicker stencil.
- Dry flat, print side down, at 86-104 F (30-40 C) and 30-50% relative humidity with good air flow (a dehumidifier helps).
- Expose: find your exact time with an exposure calculator (the metal halide table in Specs is a starting point).
- Wash out: mist both sides, let it soften a moment, then spray the print side until the image is fully open; rinse and dry (a vacuum speeds drying).
- Reclaim with a CCI emulsion remover such as ER/35.
Chemical Consultants Inc ProChem® TX-Blue Pre-Sensitized Emulsion specifications
| Part # | CCI-TX-Blue |
| Type | Pre-sensitized photopolymer, one-part |
| Solids | 45% |
| Sensitizer | None needed (pre-sensitized) |
| Inks | Plastisol (TDS also: discharge, water-based) |
| Mesh in exposure table | 86-350 |
| Exposure, 8K metal halide (coated 2/2) | 86 white 25 s; 110 white 20 s; 200 yellow 20 s; 305 yellow 18 s; 350 yellow 15 s |
| Exposure, 5K metal halide (coated 2/2) | 86 white 45 s; 110 white 35 s; 200 yellow 35 s; 305 yellow 30 s; 350 yellow 25 s |
| Drying | 86-104 F (30-40 C), 30-50% RH |
| Shelf life | 1 year unopened; coated screens up to 30 days |
| pH | 5.5 (SDS) |
ProChem® TX-Blue Pre-Sensitized Emulsion safety summary
- Signal word: None (not classified)
- Hazards: Not classified as hazardous per SDS
- Protection: Goggles recommended when refilling; gloves
- Flash point: >212 F (>100 C)
- California Prop 65: No listed Prop 65 chemicals per SDS
- Storage: Keep in a cool, dry place at 59-77 F (15-25 C), 40-60% humidity; unopened shelf life 1 year; coated screens keep up to 30 days. Handle under yellow safelight.
- Shipping: Not regulated (DOT/IMDG/IATA)
ProChem® TX-Blue Pre-Sensitized Emulsion downloads (SDS, TDS, instructions)
Works with ProChem® TX-Blue Pre-Sensitized Emulsion
ProChem® TX-Blue Pre-Sensitized Emulsion FAQ
Do I add diazo to CCI ProChem TX-Blue?
No. TX-Blue is pre-sensitized and used straight from the container.
What is the exposure time for ProChem TX-Blue?
For a 2/2 coat on 305 yellow mesh CCI starts at about 18 s (8K) or 30 s (5K metal halide). Fine-tune with an exposure calculator.
Which inks work with ProChem TX-Blue?
Plastisol; CCI's tech sheet also lists discharge and water-based inks.
What are the solids of ProChem TX-Blue?
45% solids.
Description
ProChem® TX-Blue is a blue-colored, one-part, ready-to-use textile emulsion, and is recommended for plastisol inks. It offers durability and excellent image quality. Due to the product's high solids, it yields a better coating, sharper edges, and excellent resolution. ProChem® TX-Blue is pre-sensitized and does not require the addition of diazo. This product saves time as it exposes very fast. Reclaiming the screen when using ProChem® TX-Blue is easy with CCI Stencil Removers, which are available in concentrate and ready-to-use formulas.
*Handle in light safe conditions and make sure to store in a cool dry place.
Physical Properties:
- Blue Colored, Also Available In Clear
- Virtually Pinhole & Fish Eye Free
- Extremely Durable For Long Print Runs
- Outstanding Resolution & Edge Definition
- 45% Solids
Maker documents (CCI, current): CCI ProChem TX-Blue SDS · CCI TX-Blue tech sheet
ProChem TX-Blue emulsion: questions
What inks is TX-Blue for?
ProChem TX-Blue is a one-part textile emulsion recommended for plastisol inks, with high solids for sharp edges and good resolution.
Do I need to add diazo?
ProChem® TX-Blue Emulsion
Price
Color
Size
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.


