ER-III-30-Infrared Conveyor Dryers-EconoRed II, III & VI [Add-On Cubes]-EconoRed-III-30 Cube, 240V, 10,800w. Adds 4.5' (137 cm) of heat. 1 or 3 phase. Must add 9' belt (04-06-116)

EconoRed II, III & VI [Add-On Cubes] (includes: chamber, conveyor & 2 leg assemblies) (440-480V upgrade $800)

BROCHURE & SPECIFICATIONS

EconoRed III dryers in 30, 54 or 78 in. (76, 137 or 198 cm) belt widths cure garments screen-printed with plastisols, water-based inks, discharge and/or DTF adhesives at higher rates, in a smaller footprint, and at lower cost. Fully expandable, these dryers can grow as your needs grow.

Model ER-III-30, with 30 in. (76 cm) wide belt and three 24 in. (61 cm) wide heaters (total 10,800 watts) cures up to 475 plastisol-printed garments/h, or 100 garments/h screen-printed with water-based ink or discharge.

Model ER-III-54, with 54 in. (137 cm) wide belt and three 48 in. (122 cm) heaters (total 21,600 watts) cures up to 950 plastisol-printed garments/h, or 300 garments/h screen-printed with water-based ink or discharge.

Model ER-III-78, with 78 in. (198 cm) wide belt and three 72 in. (183 cm) heaters (total 23,400 watts) cures up to 1,350 plastisol-printed garments/h, or 450 garments/h screen-printed with water-based ink or discharge.

The EconoRed III Deluxe model, available in any width, comes as standard with adjustable side-mounted heaters that increase the "cure zone" to 24 inches on the ER-III-30, 48 inches on the ER-III-54 and 72 inches on the ER-III-78. Other standard features on the deluxe model include heavy-duty drop down wheels for easy shop mobility and an 18 in. (46 cm) front conveyor extension that provides additional room for loading garments on the belt.

All models include a digital belt speed display and a belt tracking system for increased belt life. The digital PID temperature controller is accurate to +/- 1°F (+/-0.5°C), allowing the operator to fine-tune or accurately repeat drying results at any future time.

BELT WIDTH
-(Maximum garment width)
30" (76 cm), 54" (137 cm) or 78" (198 cm)

HEATER WIDTH
-24" (61 cm), 48" (122 cm) or 72" (198 cm)

MAXIMUM IMAGE WIDTH
-18 in. (46 cm), 42 in. (107 cm) or 66 in (168 cm)
(Heater width minus 6 in. [15 cm])

ADVANCED
-Top-mounted, Focused Exhaust Air System evacuates fumes and moisture quickly

ADJUSTABLE
-Damper control knob modifies exhausted air flow from 100% to 10% to optimize curing of garments, transfer films and DTF adhesives

QUIET
-20% quieter than earlier models

ACCURATE
-Temperature controller accurate to +/-1°F (+/-0.5°C)
Digital PID with fuzzy logic — industry's most advanced

FOCUSED
-Infrared Focusing System allows 2 - 7 in. (5 - 17.7 cm) belt-to-heater height adjustment to accommodate hats or bulky garments, and can be customized to provide additional heater clearance.

INNOVATIVE
-Engineered to be shorter and slimmer with high heat and production

PRECISE
-Digital belt speed display for more accurate control

FILTERED
-Filtered air intake provides clean curing air to preserve images from contamination

HEAVY DUTY
-"X-Series" Conveyor Belt Tracking System

EXPANDABLE
-Add heat chambers and belt extensions

OPTIONS

• Additional Heating chambers @ 36 in. (91 cm) long
• Belt extensions, front or rear @ 18 in. (46 cm) long
• Control box on left side (right side standard)
• 3 Phase and 208, 380, 480 voltages
• Exhaust hood for extra fume extraction
• Hat support rail
• Locking casters for mobility
• Reversing belt/HD Drive
• Additional heater clearance
• Retrofit kits are available for upgrading existing EconoRed dryers with the adjustable exhaust damper.