The MagiCote scoop coater makes direct emulsion coatings smooth and consistent. Precision-extruded anodized aluminum won't corrode and will last for years - go ahead and use your stencil remover solution to get dried emulsion off. Dual-edge profiles allows you apply more or less emulsion per stroke; providing you more control of the stencil thickness for optimum ink control.
Sharp Edge - ideal for higher mesh counts for thinner stencils and higher resolution printing.
Round Edge - ideal for faster stencil buildup when printing bolder artwork, high density or other specialty printing. Also ideal for courser mesh counts for less resistance against the mesh.
Includes a plastic cover made to match specific order, to protect edges when not in use.
ORDER NOTE:
Your cart will show the scoop coater at the price shown, plus coater endcaps at no charge; however, the scoop coater will come fully assembled.
PRO TIP:
#1 - The coater edges are most critical - any nick/gouge/dip in them and you will have variations in your final print. Trying to repair/smooth the edges never works; it only gets worse. This is a critical TOOL in screen making; buy a new one!
#2 - Use two hands! For the most even coatings (up/down and side-to-side), holding the coater with both hands yields better results.
#3 - Don't go too fast! Emulsions are fairly slow to flow; therefore, to avoid getting air bubbles trapped in mesh opening. A textile frame normally takes 6 to 10 seconds from bottom to top.
#4 - ALWAYS do a final coat from the SQUEEGEE SIDE. This pushes the emulsion through to the print side which is where the ink gasket is made.
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.
Please wait
Please wait
Please wait
Please wait
In order to use a design you must have the full rights to it. If you are unsure or have any doubts, please confirm your ownership or seek permission from the copyright owner.
When you save a design, you are agreeing to the following terms:
The uploaded image was resized to meet the 25 megapixel limit for raster images. The image may appear to be smaller than intended. You can avoid the raster size limit by uploading artwork in vector format when possible.
You will be redirected to a page where you can request a quote for this blank product. Any decorations you have added to this product will be removed.
| Products | Qty | Price |
|---|
You have already used screen printing in this order. To avoid additional screen costs you can re-use an existing screen print design for this product.
Your layout contains images that have been resized to the point where they may appear blurred.
Your layout contains images that appear outside the design area.
You cannot save the product until you have moved the images within the design area.
Your layout contains images that appear outside the design area.
Your layout contains overlapping images.
You cannot save the product until you have moved the images so they are not overlapping.
Blank product purchase is not allowed
You will not be able to purchase this product until you add a decoration design.
Inactive blank product in use
Minimum quantity requirements not met
You will not be able to purchase this item until you have increased the quantity.
Screen(s) still updating...
You will not be able to purchase this item until all re-used screens have been updated.
Your layout contains images that have been resized to meet the 25 megapixel limit for raster images and they may appear smaller than intended. You can avoid the raster size limit by uploading artwork in vector format when possible.
By clicking OK, you are agreeing to accept the final product regardless of image quality. Click Cancel if you want to go back and fix the images.
