Ulano Emulsion Ulano 925WR-P Phthalate-Free, Water Resistant Emulsion (Purple) 1GUF925WR-P
Ulano Corporation 925WR-P Phthalate-Free, Water Resistant Emulsion: what it is
A violet diazo emulsion made for water-based textile inks; the stencil is fully water resistant and very durable. Ulano markets it as phthalate-free. It ships with a pre-measured powder diazo, so it avoids hazmat labels and add-on shipping.
Best for: Water-based textile and sportswear printing; Long runs needing full water resistance; Shops wanting a phthalate-free emulsion.
How to use 925WR-P Phthalate-Free, Water Resistant Emulsion
- Degrease with Screen Degreaser No. 3 (Ulanogel 23 to roughen and degrease new mesh).
- Sensitize: fill the diazo bottle with lukewarm water to the shoulder (quart C58 once; gallon C30 twice; 5 gal C31 twice), shake, wait 15 min, stir into the emulsion until even, then let it de-bubble at least 1 hour. Write the date on the label.
- Method 1: one coat on the print side, then one on the squeegee side; dry.
- Method 2: two coats print side, then two coats squeegee side, wet-on-wet, turning the screen 180 degrees after each coat.
- Method 3: do Method 2, dry, then add two more print-side coats wet-on-wet (smoother print edge).
- Dry flat, print side down, at room temperature in a clean area (fan helps); a dryer with filtered air up to 104 F (40 C) is fine.
- Work out a starting time from the base exposure table, then fine-tune with a step-wedge test or exposure calculator: best exposure is when the squeegee side is hard (not slimy) and the colour stops darkening.
- Wash out: wet both sides with a gentle cold spray, then spray hard from the print side until the image clears; rinse until no soft emulsion or foam is left; blot or vacuum dry.
- Blockout: leftover emulsion before exposure, or (non-water inks) Screen Filler No. 65 / No. 10.
- Reclaim: remove ink, Degreaser No. 3, brush on Stencil Remover No. 4 or Paste No. 5 (do not let it dry), power-wash; Haze Remover No. 78 if needed.
Ulano Corporation 925WR-P Phthalate-Free, Water Resistant Emulsion specifications
| Part # | 1GUF925WR-P |
| Type | Diazo emulsion (powder diazo included) |
| Solids | 41% |
| Viscosity | 7,000 cps sensitized (TDS); web page shows 5,500 cps |
| Sensitizer | Diazo: C58 (qt), C30 (gal), C31 (5 gal), included |
| Inks | Water-based textile inks |
| Water resistance | Excellent |
| Solvent resistance | Good |
| Exposure (156 mesh, Ulano est.) | 5 kW metal halide ~30 s; 1 kW ~190 s; black light ~720 s |
| Base exposure (40 in, method 1/2/3) | Metal halide 5 kW: 16/48/62 s; 2 kW: 44/124/164 s; 40 W fluorescent: 288 s / 12 min / not recommended |
| Shelf life | Unsensitized 1 year; sensitized 3-6 weeks at room temp (web: 4-6 weeks), up to 3 months refrigerated |
| Maker sizes | 28 oz, 1 gal, 5 gal, 55 gal |
| Claim | Phthalate-free (maker claim, no certificate) |
925WR-P Phthalate-Free, Water Resistant Emulsion safety summary
- Storage: Unsensitized up to 1 year; sensitized 3-6 weeks room temp or 3 months refrigerated; coated screens cold, dry, dark
- Shipping: Powder diazo means no hazardous labels or add-on shipping charges (Ulano TDS)
925WR-P Phthalate-Free, Water Resistant Emulsion downloads (SDS, TDS, instructions)
- Ulano Corporation Tech Data Sheet 925WR-P & 925WR-P/CL (Ulano, rev 1213dm)
- Ulano Corporation Ulano Emulsion Brochure (selection chart)
Making a direct emulsion stencil (Ulano) video
Works with 925WR-P Phthalate-Free, Water Resistant Emulsion
925WR-P Phthalate-Free, Water Resistant Emulsion FAQ
How do I mix the diazo into Ulano 925WR-P?
Fill the diazo bottle to the shoulder with lukewarm water (once for a quart, twice for gallon and 5 gal), shake, wait 15 min, stir in until the colour is even, then rest 1 hour.
How long does 925WR-P last after sensitizing?
3-6 weeks at room temperature, or up to 3 months in a refrigerator. Unsensitized it keeps about a year.
Is Ulano 925WR-P good for water-based ink?
Yes. It is made for water-based textile inks and gives a completely water-resistant stencil.
What colour is Ulano 925WR-P?
Violet (pale violet). The /CL version is clear with a separate dye.
925WR-P Phthalate-Free, Water-Resistant Emulsion (Purple)
925WR-P/CL
925WR-P & 925WR-CL share the main characteristics of Ulano's TZ emulsions, but with a higher solids content and similar resolution, edge definition and exposure latitude.
Stencils produced with 925WR-P & 925WR-P/CL are completely water resistant and very durable.
925WR-P & 925WR-CL come with a powder diazo sensitizer emulsion, for faster and surer mixing. Recommended for imprinted sportswear applications.
PHTHALATE-FREE
925WR-P & 925WR-P/CL are the same, but 925WR-P/CL is supplied clear for easier see-through registration.
Dye is provided separately with 925WR-P/CL.
AVAILABILITY
The pre-measured diazo sensitizer is included with each unit.
28 ounces (0.83 liters)
1 gallon (3.785 liters) 4 per carton
5 gallons (18.927 liters)
55 gallons (1041 liters)
Ulano Emulsion
925WR-P emulsion: questions
What is the difference between 925WR-P and 925WR-P/CL?
They are the same emulsion. 925WR-P/CL is supplied clear for easier see-through registration, with the dye packed separately.
Is 925WR-P water resistant?
Yes. Stencils are completely water resistant and very durable, and the formula is phthalate-free.
How is it sensitized?
Ulano 925WR-P Phthalate-Free, Water Resistant Emulsion (Purple)
Price
Color
Size
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.


