WM Plastics Inc Strong Glow Qt.* I109965-Q
Phosphorescent Glow In The Dark Screen Printing Ink
Glow In The Dark Screen Printing Ink
Strong Glow Plastisol Ink is a unique high qulity Strong Glow screen printing plastisol ink. Print flash print with a white underbase for great screen printing results.
Wm Plastics Phosphorescent Glow In The Dark Ink screen printing plastisol ink are perfect for all screen printing shops large or small. Our inks are very good on automatic screen printing presses and or manual screen printing presses.
Non-Phthalate Plastisol (Midori Series)
-
- Glow-in-the-dark ink has an extremely high phosphorescent pigment loading, compared to other manufactures, therefore providing a brighter and more long lasting glow. Phosphorescent Glow Ink is ready to print, but WM does offer the powder and base for sale so the printer can mix his own glow ink at any strength he wishes. Great for novelty items.
-
- Bleed Resistance: None
-
- Opacity: Medium
-
- Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
-
- Mesh: 86-110
-
- Stencil: Any direct emulsion or capillary film.
-
- Wet on Wet Printing: Can be printed wet-on-wet to increase production.
-
- Modifications: To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or dulling use Suede Additive (I10-9907).
-
- Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
-
- Flashing: 700ºF for 9 seconds, just enough for the surface to be tack free.
-
- Fusion/Curing: 325 F/160 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
-
- Wash-up: Any plastisol cleaner.
-
- Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off ona white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and alwaystest on fabric to be printed.
Strong Glow Screen Printing Ink specifications
| Brand / series | WM Plastics Midori non-phthalate plastisol, Glow-in-the-Dark |
| Best on | White garments; cotton and blends (poly with LB underlay) |
| Mesh | 86-110 |
| Flash | 700 °F about 9 sec, until tack free |
| Cure | 270-325 °F (132-163 °C) for 1 to 1.5 min; heat press 390 °F (195 °C) for 8 sec |
| Opacity | Low |
| Bleed resistance | None |
| Squeegee | Medium to hard, 45°, sharp edge |
| Storage | 65-80 °F, out of direct sunlight |
| Wash-up | Any plastisol cleaner |
High pigment loading for a bright, long-lasting green glow.
Other sizes: gallon
Modify it: Soft-hand Base · G&S Base · Puff Additive
Downloads: WM ink tech catalog (PDF)
Ask about volume discounts · 480-229-7806 · pick up in Tempe, AZ
FAQ
What garments is Strong Glow Screen Printing Ink for?
White garments; cotton and blends (poly with LB underlay).
How do I cure Strong Glow Screen Printing Ink?
270-325 °F (132-163 °C) for 1 to 1.5 min; heat press 390 °F (195 °C) for 8 sec. If the print rubs off or cracks, raise the temperature or dwell time.
Is it phthalate free?
Yes. It is part of WM Plastics' Midori non-phthalate plastisol line.
Strong Glow Qt.*
Price
Color
Size
Quantity
minimum quantity: x available in bundles of: x Product ordered in bundles.
Shipping
bucketsofink has a highly developed production and shipping system and we make every effort to ship your order in a fast and effecient manner.






